Installing The Front Cover - Fujitsu ETERNUS CS800 Getting Started Manual

Installing the CS800 System in the Rack

Installing the Front Cover

V
1. Fit the front cover in the left end slot of the DX80 module to attach.
I
Figure 35: Installing the Front Cover (1)
2. Holding the tab on the front cover, attach the right side of the cover to the DX80 module:
Figure 36: Installing the Front Cover (2)
56
CAUTION!
The front covers of DX80 Basic and DX80 Expansion differ and may not be
confused.
Be careful so that the part of the front cover to be fit in the slot does not touch
the power switch.
Installing the ETERNUS CS800 Components
U41842-J-Z125-1-76