2 Select the total amount of the installed printer memory for the memory
capacity setting.
3 Click Apply, and then click OK.
4 Close the Printers and Faxes(, Printers, or Devices and Printers) dialog
box.
Installing the Optional 250-Sheet Feeder
CAUTION:
be sure to turn off the printer, unplug the power cable, and disconnect all cables
from the back of the printer before starting this task.
1 Ensure that the printer is turned off, and then disconnect all cables from the
back of the printer.
2 Remove all packaging from the optional 250-sheet feeder.
3 Place the optional 250-sheet feeder in the location that the printer is located.
4 Pull the standard 250-sheet tray out of the printer about 200 mm. Hold the
standard 250-sheet tray with both hands, and remove it from the printer.
5 Lift the printer and align the five guide pins of the optional 250-sheet feeder
with the holes at the bottom of the printer. Gently lower the printer onto the
optional 250-sheet feeder.
CAUTION:
lifted holding the front and back. Never lift the printer from its sides.
Downloaded from ManualsPrinter.com Manuals
If you install the optional 250-sheet feeder after setting up the printer,
Two people are required to lift the printer. The printer should be
Installing Optional Accessories
59