Dell 2155cn User Manual page 208

Line Type
Tone/Pulse
Resend Delay
Redial
Attempts
Redial Delay
Junk Fax Setup Sets whether to reject unwanted faxes by accepting only the faxes
Remote Receive Sets whether to receive a fax by pressing a remote receive code on the
Remote Receive
Tone
Fax Header
Fax Header
Name
Fax Number
Fax Cover Page Sets whether to attach a cover page to faxes.
DRPD Pattern Sets the Distinctive Ring Pattern Detection (DRPD) setting from
*1
Duplex Print
Sent Fax
Forward
Fax Forward
Number
Prefix Dial
Prefix Dial
Number
206
Dell Printer Configuration Web Tool
Downloaded from ManualsPrinter.com Manuals
Sets the default line type; PSTN or PBX.
Sets whether to use tone or pulse dialing.
Sets the interval (3–255 seconds) between re-send attempts.
Sets the number of redial attempts (0–13) to make if the destination
fax number is busy. If you enter 0, the printer will not redial.
Sets the interval (1–15 minutes) between redial attempts.
from the numbers registered in the Phone Book
external telephone.
Sets a 2-digit remote receive code when Remote Receive is On.
Sets whether to print the information of the sender on the header of
faxes.
Allows you to enter a name that will be printed on the header of faxes.
Allows you to enter the fax number of the printer, which will be
printed on the header of faxes.
Pattern1 to Pattern7.
DRPD is a service provided by some telephone companies.
Sets whether to print on both sides of a sheet of paper.
Sets whether to forward incoming faxes to a specified destination.
Allows you to enter the fax number of the destination to which
incoming faxes will be forwarded.
Sets whether to set a prefix dial number.
Sets a prefix dial number of up to five digits. This number dials before
any auto dial number is started. It is useful for accessing the Private
Automatic Branch Exchange (PABX).