Dell 2155cn User Manual page 190

Fax Settings
188
Dell Printer Configuration Web Tool
Downloaded from ManualsPrinter.com Manuals
Receive Mode Displays the fax receiving mode.
Auto Receive Fax Displays the interval at which the printer goes
into the fax receive mode after receiving an
incoming call.
Auto Receive Displays the interval at which the printer goes
Tel/Fax into the fax receive mode after the external
telephone receives an incoming call.
Auto Receive Displays the interval at which the printer goes
Answer/Fax into the fax mode after the external answering
machine receives an incoming call.
Line Monitor Displays the volume of the line monitor, which
audibly monitors a transmission through the
internal speaker until a connection is made.
Ring Tone Displays the volume of the ring tone, which
Volume indicates that an incoming call is a telephone call
through the internal speaker when Receive
Mode is set to Telephone/Fax.
Line Type Displays the line type; PSTN or PBX.
Tone/Pulse Displays whether to use tone or pulse dialing.
Resend Delay Displays the interval between re-send attempts.
Redial Attempts Displays the number of redial attempts to make
if the destination fax number is busy.
Redial Delay Displays the interval between redial attempts.
Junk Fax Setup Displays whether to reject faxes sent from
unwanted stations.
Remote Receive Displays whether to receive faxes by pressing a
remote receive code on the external telephone.
Remote Receive Displays the 2-digit remote receive code when
Tone Remote Receive is On.
Fax Header Displays whether to print the information of the
sender on the header of faxes.
Fax Header Displays the name of the sender that will be
Name printed on the header of faxes.
Fax Number Displays the fax number of the printer, which
will be printed on the header of faxes.