admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm
Using an Answering Machine
You can connect a telephone answering device (TAD) directly to the back of
your printer as shown above.
•
Set your printer to the Ans Machine/Fax and set Auto Rec
Ans/Fax to specify the time for the TAD.
•
When the TAD picks up the call, the printer monitors and takes the line if fax
tones are received and then starts receiving the fax.
•
If the answering device is off, the printer automatically goes into the Fax
after the ring tone sounds for a predefined time.
•
If you answer the call and hear fax tones, the printer will answer the fax call
if you
Set OnHook to On (you can hear voice or fax tones from the remote
machine), and then press the
OR
Press the two-digit remote receive code and hang up the receiver.
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
Downloaded from ManualsPrinter.com Manuals
FILE LOCATION: C:\Users\fxstdpc-
(Start) button and hang up the receiver.
415
Faxing