Dell 2155cn User Manual page 236

Trap
Notification 1-4
*1
The default value can be changed by using Dell Printer Configuration Web Tool.
SNMP v3
Purpose:
To edit the detailed settings of SNMP v3 protocol.
To enter this page, click Edit SNMP v3 Properties in the SNMP page.
Values:
234
Dell Printer Configuration Web Tool
Downloaded from ManualsPrinter.com Manuals
Trap Address Select the check boxes to notify trap occurrence. In
Type this case, specify the IP address and IP socket in the
following format:
Trap Address
IPv4
Port Number
Specify the IP address and IP socket in the
Notify
nnn.nnn.nnn.nnn:mmmmm format. Each section of
"nnn" is a variable value between 0 and 255. Note
that values 127 and 224-254 are not valid for the
first three-digits only. IP socket mmmmm is a
variable value between 0 and 65,535.
IPv6
Specify the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmm
mm format. Each section of "xxxx" is a
hexadecimal variable value between 0 and ffff. IP
socket mmmmm is a variable value between 0 and
65,535.
Authenticate Select the check box to notify Authenticate Error
Error Trap Trap.