Unload Filament - XYZ Printing da Vinci Jr. 1.0 Quick Manual
Hide thumbs
Also See for da Vinci Jr. 1.0:
- User manual (25 pages) ,
- User manual (30 pages) ,
- Instructions (3 pages)
Table of Contents
Advertisement
LOAD FILAMENT
Then load filament using the control panel on the printer...
DA VINCI Jr. 3in1
UTILITIES
SETTINGS
INFO
Select "UTILITIES" > "CHANGE SPOOL" > "LOAD FILAMENT".
1
LOAD FILAMENT
EXTRUDER HEATING
TEMPERATURE 210
PLEASE WAIT
2
Wait for the extruder to heat up and load filament.
UNLOAD FILAMENT
First unload filament using the control panel on the printer...
DA VINCI Jr. 3in1
BUILD FROM CARD
UTILITIES
SETTINGS
1
Select "UTILITIES" > "CHANGE SPOOL" > "UNLOAD FILAMENT".
LOAD FILAMENT
EXTRUDER HEATING
TEMPERATURE 210
PLEASE WAIT
2
Wait for the extruder to heat up and unload filament. Press "OK" to pull out filament.
When finishing "UNLOAD FILAMENT"
First open the release arm and then pull out the filament
with spool axle rings. Arrange it properly for later use.
Note: Always implement the "UNLOAD FILAMENT" function when replacing
the Spool in order to ensure proper removal of the filament. Cutting
filament too closely to the Extruder Module may result in residual
filament blocking and causing damage to your Extruder Module.
HD23F1JS016
UTILITIES
CHANGE SPOOL
HOME AXES
JOG MODE
LOADING
∘
C
PLEASE WAIT
UTILITIES
CHANGE SPOOL
HOME AXES
JOG MODE
UNLOADING
PLEASE WAIT
C
∘
[ OK ] TO RETURN
Unload Filament
da Vinci
CHANGE SPOOL
LOAD FILAMENT
UNLOAD FILAMENT
CHECK FILAMENT
OUT FROM NOZZLE
[
]
TO RETRY
＜
[ OK ]
TO RETURN
3
Check if the nozzle outputs filament and
press "OK" to go back to main menu.
CHANGE SPOOL
LOAD FILAMENT
UNLOAD FILAMENT
March 2016
P 7
Advertisement
Table of Contents
