Installing The Accessories - XYZ Printing da Vinci Jr. 1.0 Quick Manual

Note: Please follow these steps and ensure that the guide tube is properly installed before
starting the "LOAD FILAMENT" function. Failure to install the guide tube may disrupt filament feed.
Install the filament guide tube
1 Direct the guide tube from the
tube movement area out of the
machine and then insert the
other end of the filament tube
into the feed module tube port.
Install the filament guide tube to the extruder
4
Insert the guide tube into the feed hole all the way down and install the extruder
back to the printer.

Installing the Accessories

HD23F1JS016
2 Ensure that the guide tube has been tightly
inserted into the feeding hole.
Reminder: If you are not sure where the feed module tube port is, you
may open the casing of the machine to see the indication label.
da Vinci
3 Remove the extruder
Press the white button at the
back of the extruder to release it.
Install the extruder
5
Align the extruder with the bracket
and press the extruder to attach it to
the socket.
March 2016
P 5