5-1.1.3 Unload Filament - XYZ Printing da Vinci 2.0 Duo User Manual

User Manual da Vinci 2.0 Duo

5-1.1.3 UNLOAD FILAMENT

Remove filament when printer has reached working temperature as instructed. Then remove cartridge
locker and the cartridge unloaded.
P 13
w w w . e k t . c o m
2
1.Select the cartridge to be unloaded.
For loading cartridge 1, please
select "CARTRIDGE1".
2.Select "UNLOAD FILAMENT" and
"OK".
3.Extruder should be heated to
working temperature.
Please wait until further instructed.
4.Pull the filament out from the
extruder as instructed and press
"OK".
Katrangi
Electronics Trading