Installing The Accessories - XYZ Printing da Vinci Jr.1.0w User Manual

Note: Please follow these steps and ensure that the guide tube is properly installed before
starting the "LOAD FILAMENT" function. Failure to install the guide tube may disrupt filament feed.
．Guide tude
1 Before installing the guide tube, turn off the
printer and move the extruder to the far left-end
of the X-axis. If not done otherwise, the print
quality will be affected.
Direct the guide tube from the tube movement
3
area out of the machine and then insert the
other end of the filament tube into the feed
module tube port.

Installing the Accessories

．X axis
Reminder: If you are not too sure where the feed module tube port is,
you may open the casing of the machine to see the indication label.
After the extruder has been adjusted, insert the guide
2
tube into the extruder.
4
Ensure that the guide tube has been tightly
inserted into the port to complete the guide tube
installation process.
da Vinci Jr.1.0
2016
Ver. 1.8 April
P 5