Setup; Checking Fluid Levels; Activating And Charging The Battery - Toro 30381 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
Media and Additional Parts
Description
Operator's Manual
Engine Operator's Manual
Parts Catalog
Operator Training Materials
Pre-delivery Inspection Sheet
Engine warranty
1

Checking Fluid Levels

No Parts Required
Procedure
1. Check the hydraulic fluid level before starting the
engine, refer to Checking the Hydraulic Fluid Level
in Hydraulic System Maintenance.
2. Check the engine oil level before and after starting
the engine, refer to Checking the Engine Oil Level
in Engine Maintenance.
3. Check the cooling system before starting the engine;
refer to Checking the Cooling System in Cooling
System Maintenance.
Description
No parts required
No parts required
Mower Deck or Polar Trac Kit (sold
separately)
Qty.
–
–
1
Qty.
1 Read before operating the machine.
1 Read before operating the machine.
1 Use to lookup and order parts.
1
View before operating the machine.
1 Read to verify proper delivery.
1 Save for future use.
2
Activating and Charging the
Battery
No Parts Required
Procedure
Use only electrolyte (1.265 Specific Gravity) to fill
battery initially.
1. Remove the battery from the machine.
Important: Do not add electrolyte while the
battery is in the machine. You could spill it,
causing corrosion.
2. Clean the top of the battery and remove the vent
caps (Figure 3).
9
Use
Check the hydraulic fluid, engine oil,
and coolant levels.
Activate and charge the battery
Install the mower deck/Polar Trac.
Use