Toro 30381 Operator's Manual page 18

Figure 33
1. Floor plate cover
26. Connect the cab pressure and return hoses to the
quick couplers on the rear frame mount (Figure 34).
Figure 34
1. Pressure hose
27. Remove the cap and plug the cab wire harness
connector into the harness on the rear frame mount
(Figure 35).
2. Mounting screws
2. Return hose
1. Cab wire harness
connector
28. Start the machine. Run the lift arm up and down and
check for hydraulic leaks. Check the antifreeze level
and replenish as required.
18
Figure 35
2. Harness connector on the
rear frame mount