Child Seat Functions; Adjusting Harness And Head Restraint Height - Britax GROW WITH YOU User Manual

Child Seat Functions

Adjusting Harness and Head Restraint Height

IMPORTANT:
before using the child seat. Place the child seat on the floor
and have your child sit in the seat. Follow the instructions
on the following pages to make the proper adjustments to the
harness, buckle, and head restraint.
1. Loosen the harness if
necessary.
a. Press release lever.
b. Pull both harness
straps forward.
2. Lift and slide the harness
height adjuster into the
desired position.
NOTE: Ensure the head
restraint has locked into
position.
IMPORTANT:
the harness height adjuster also
adjusts the height for the head
restraint. Always adjust the
harness straps to the closest
position at or above your child's
shoulders.
IMPORTANT:
adjust the head restraint so
that the vehicle shoulder belt
lays straight across the center
of the child's chest and above
the child's shoulder. The vehicle
shoulder belt should be routed
through the red shoulder belt
guide without contacting the
child's neck.
Make all adjustments for the fit of your child
In Harness Mode,
In Booster Mode,
GROW WITH YOU User Guide
Above
Shoulder Level
Shoulder level
Below
Shoulder Level
Table of Contents
21 21