Lubrication; Greasing The Sprayer System - Toro Multi Pro WM 41240 Operator's Manual

Lowering the Tank Assembly
1. When you're ready to lower the tank assembly, remove
the bed support from the cylinder and insert it into the
brackets on the back of the ROPS panel.
CAUTION
Do not try to lower the tank assembly with the
bed safety support on the cylinder.
2. Retract the lift cylinders to carefully lower the tank to
the frame.
3. Install the 2 hold down bolts and fasteners to secure
the tank assembly.
4. Fold the boom extensions rearward to the extended
position.
5. Use the boom control switches to raise the boom
extensions to the transport position.

Lubrication

Greasing the Sprayer System

Service Interval: Every 50 hours
Every 100 hours
Lubricate all bearings and bushings after every 100 hours or
once a year, whichever occurs first.
Grease Type: No. 2 General-purpose, lithium-base grease
1. Wipe the grease fitting clean so that foreign matter
cannot be forced into the bearing or bushing.
2. Pump grease into the bearing or bushing.
3. Wipe off excess grease.
g018934
1. Pump
39
1
2
Figure 43
2. Grease point