Toro Multi Pro WM 41240 Operator's Manual page 44

Note: This prevents the assembly from shifting when
the fasteners securing the tank assembly to the frame
are loosened.
2. Lower booms to approximately 45° and then pivot
them forward.
3. Disconnect the wire harness and the PTO shaft.
4. Store the control box, using the existing fasteners, to
the left, rear of the tank skid.
5. Remove all the fasteners retaining the sprayer tank
assembly to the machine frame.
Note: Retain all parts.
6. Lift the tank assembly 7.5-10 cm (3-4 inches), and
remove the lynch pins and clevis pins securing the lift
cylinders to the tank assembly.
7. Retract the lift cylinders and return them to their
holders on the vehicle frame.
Note: Lift the tank assembly clear of the vehicle.
8. When the sprayer tank assembly is clear of the vehicle,
insert the 4 jack stands provided and lock the jack
stands with the clevis pins provided.
9. Move the vehicle out of the way.
44