Product Overview; Controls - Toro Multi Pro WM 41240 Operator's Manual

Product Overview

4
3
2
1
1. Master-boom switch
2. Boom switches
3. Boom lift switches
4. InfoCenter
5. Pressure gauge

Controls

Master-boom Switch
The master-boom switch allows you to start or stop the spray
operation. Press the switch to enable or disable the spray
system (Figure 30).
G022361
Figure 30
6. Rinse switch (optional)
7. Sonic-boom switch (optional)
8. Application-rate switch
9. Agitation switch
10. Rate-lockout-key switch
Boom Switches
The boom switches are located along the bottom of the
control panel (Figure 30). Toggle each switch upward to turn
the corresponding boom section on and downward to turn
them off. When the switch is turned on, a light on the switch
illuminates. These switches will only affect the spray system
when the master-boom switch is on.
25
5
6
7
8
9
10