Maintenance - Toro Multi Pro WM 41240 Operator's Manual

•
When operating with a heavy load, reduce your speed and
allow for sufficient braking distance. Do not suddenly
apply the brakes. Use extra caution on slopes.
•
Be aware that heavy loads increase your stopping distance
and reduce your ability to turn quickly without tipping
over.

Maintenance

•
Only permit qualified and authorized personnel to
maintain, repair, adjust, or inspect the vehicle.
•
Before servicing or making adjustments to the machine,
stop the engine, set the parking brake, and remove the key
from the ignition to prevent someone from accidentally
starting the engine.
•
Empty the tank before tilting or removing sprayer from
vehicle and before storage.
•
Never work under a sprayer without using tank support
prop rod.
•
Make sure all hydraulic line connectors are tight, and all
hydraulic hoses and lines are in good condition before
applying pressure to the system.
•
Keep body and hands away from pin hole leaks that can
eject hydraulic fluid under high pressure. Use paper or
cardboard, not hands, to search for leaks.
DANGER
Hydraulic fluid escaping under pressure can
have sufficient force to penetrate skin and do
serious damage.
If fluid is injected into the skin it must be
surgically removed within a few hours by a
doctor familiar with this form of injury or
gangrene may result.
•
Before disconnecting or performing any work on the
hydraulic system, all pressure in system must be relieved
by stopping engine, cycling dump valve from raise to
lower and/or lowering the tank and attachments. If the
tank must be in the raised position, secure it with the
safety support.
•
To make sure entire machine is in good condition, keep
all nuts, bolts and screws properly tightened.
•
To reduce potential fire hazard, keep the engine area free
of excessive grease, grass, leaves and accumulation of dirt.
•
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the engine and any moving parts.
Keep everyone away.
•
Do not overspeed engine by changing governor settings.
Maximum engine speed is 3650 rpm. To assure safety
and accuracy, have an Authorized Toro Distributor check
maximum engine speed with a tachometer.
•
If major repairs are ever needed or assistance is required,
contact an Authorized Toro Distributor.
•
To be sure of optimum performance and safety,
always purchase genuine Toro replacement parts and
accessories. Replacement parts and accessories made by
other manufacturers could be dangerous. Altering this
vehicle in any manner may affect the vehicle's operation,
performance, durability or its use may result in injury or
death. Such use could void the product warranty of The
Toro® Company.
•
This vehicle should not be modified without
The Toro® Company's authorization. Direct
any inquiries to The Toro® Company,
Commercial Division, Vehicle Engineering Dept.,
300 West 82nd St., Bloomington, Minnesota 55420–1196.
USA
•
Refer to your vehicle's Operator's Manual for other
maintenance.
7