Installing The Fresh-Water Tank; Installing The Anti-Siphon Fill Receptacle; Upper Fresh-Water Tank Mount; Lower Fresh-Water Tank Mount - Toro Multi Pro WM 41240 Operator's Manual

11

Installing the Fresh-water Tank

Parts needed for this procedure:
1

Upper fresh-water tank mount

1

Lower fresh-water tank mount

1

Fresh-water tank

4

Flange nut (3/8 inch)

2

Washer

2

Flange-head bolt (3/8 inch)

2

Flange-head bolt (1/2 inch)

1

U-bolt

Procedure
Note: The fresh-water tank cannot be installed on a 2 post
ROPS.
1. Install the upper and lower fresh-water tank mounts
to the fresh-water tank using 2 flange-head bolts and
flange nuts (Figure 25).
3 4
1
2
1
G022360
Figure 25
1. Flange nut
2. Lower fresh-water tank
mount
3. Washer
4. Upper fresh-water tank
mount
5. Flange-head bolt (3/8
inch)
6
5
7
6. Fresh-water tank
7. Fresh water tank plate
8. Flange-head bolt (1/2
inch)
9. U-bolt
2. Attach the upper fresh-water tank mount to the ROPS
using 2 washers, 2 bolts, and the existing nuts (Figure
25).
3. Secure the lower fresh-water tank mount to the ROPS
using the U-bolt and 2 flange nuts (Figure 25).
12
Installing the Anti-siphon Fill
Receptacle
Parts needed for this procedure:
1 Fill receptacle assembly
1 Flange-head bolt (5/16 x 3/4 inch)
Procedure
Place the fill receptacle assembly over the threaded hole in the
tank and secure it with a flange-head bolt (5/16 x 3/4 inch)
(Figure 26).
8
1. Fill receptacle assembly
9
22
Figure 26
2. Flange bolt
(5/16 x 3/4 inch)