Turning Off The Video Circuits; Selecting The Video Input Source (Not Canadian Model); Setting The Hdmi Output Resolution - Onkyo DV-SP1000 Instruction Manual

Advanced Playback
OFF indicator
VIDEO INPUT button & indicators
VIDEO CIRCUIT OFF
VIDEO INPUT

Turning Off the Video Circuits

You can turn off all of the output video circuitry, elimi-
nating the possibility of interference, for a pure-audio
experience when playing audio-only discs.
1
Press the remote controller's
VIDEO CIRCUIT
[VIDEO OFF] button or the
OFF
DV-SP1000/DV-SP1000E's
[VIDEO CIRCUIT OFF] button.
The output video circuitry is turned off,
Remote controller
the VIDEO CIRCUIT OFF indicator
VIDEO OFF
lights up, and the V.OFF indicator
V OFF
appears on the display.
2 To turn the video circuitry back
on, press the button again.
The output video circuitry is turned on,
the VIDEO CIRCUIT OFF indicator
goes off, and the V.OFF indicator disap-
pears from the display.
Notes:
• When the video circuitry is turned off, all of the
DV-SP1000/DV-SP1000E's video outputs don't
work. The VIDEO IN inputs are not affected.
• With some discs you need start playback from a menu,
in which case you should turn off the video circuitry
after starting playback.
• Although intended for use with audio discs, this func-
tion can also be used to enjoy soundtracks and music
on DVD-Video discs and VCDs.
66
ON STANDBY
TV
I INPUT
+
1 2 3
TV CH
-
4 5 6
7 8 9
TV VOL
+ 10
0 CLEAR
SEARCH MEMORY DIMMER AMP INPUT
S M D INPUT
AMP INPUT
DVD V1 V2 V3
MODE
DVD AMP VCR TV
PICTURE
ZOOM ON CONTROL
AUDIO
SEL
+
CH
ZOOM
ENTER VOL
L MODE
-
DISPLAY MUTING
LAST MEMORY STEP/SLOW RANDOM
REC
LM RD
AUDIO SUBTITLE ANGLE RESOLUTION
RESOLUTION
AUDIO SBTTL ANGLE RSLTN
REPEAT A-B ASPECT
REPEAT A-B ASPECT
VIDEO INPUT VIDEO OFF LEARNING
V IN V OFF L1 L 2
VIDEO OFF
OPEN/CLOSE
L 3 L 4
RC-563DV
Selecting the Video Input Source
(not Canadian model)
This section explains how to select the video input
source when you've connected other video components
to the DV-SP1000/DV-SP1000E's video inputs, as
shown on page 39.
Press the [VIDEO INPUT] button
repeatedly to select the video
VIDEO INPUT
input source.
DVD: The DV-SP1000/DV-SP1000E.
EXTERNAL: VIDEO IN (S VIDEO
or VIDEO).
Remote controller
The DVD and EXTERNAL indicators
VIDEO INPUT
show the currently selected video input
V IN
source.
Notes:
• See the table on page 27 for details on how the
DV-SP1000/DV-SP1000E's video outputs work with
each video input source.

Setting the HDMI Output Resolution

This section explains how to change the video resolution
when your TV or projector is connected to the HDMI
OUT.
Press the remote controller's
[RESOLUTION] button.
Remote controller
The current resolution scrolls across
RESOLUTION
the display.
RSLTN
While the resolution is scrolling,
press the [RESOLUTION] button
repeatedly to select another res-
olution.
The DV-SP1000/DV-SP1000E sup-
ports the following resolutions:
640 x 480p: (VGA), 60 Hz
720 x 480p: (progressive), 60 Hz
720 x 576p: (progressive), 50 Hz
1280 x 720p: (progressive), 50/60 Hz
1920 x 1080i: (interlaced), 50/60 Hz
Through Source Resolution: External
input video is output at the same resolu-
tion. DVD playback is output at 480p or
576p.
Notes:
• With HDMI, the TV reports to the DV-SP1000/
DV-SP1000E what resolutions it supports, and then
only those resolutions can be selected.
• The letters i and p indicate interlaced and progressive
respectively.