Onkyo DV-SP1000 Instruction Manual

Super audio cd & dvd audio/ video player

Hide thumbs Also See for DV-SP1000:

Connection instruction (1 page)

Service manual (134 pages)

Service manual (134 pages)

Table Of Contents

100

101

102

Table of Contents

Quick Links

Need help?

Do you have a question about the DV-SP1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Onkyo DV-SP1000

Page 1 Video Player DV-SP1000 DV-SP1000E Instruction Manual Thank you for purchasing the Onkyo DV-SP1000/ DV-SP1000E Super Audio CD & DVD Audio/Video Player. Read this manual carefully before using your new player. A good understanding of its features and operation will allow you to achieve optimum perfor- mance and enjoyment.
Page 2: Important Safety Instructions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING QUALIFIED PERSONNEL.
Page 3: Precautions
Precautions This unit contains a semiconductor laser system and is classiﬁed as a “CLASS 1 LASER PRODUCT”. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit. To prevent being exposed to the laser beam, do not try to open the enclosure.
Page 4: For Canadian Model
We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. GROEBENZELL, GERMANY ONKYO EUROPE ELECTRONICS GmbH 1.
Page 5: Installing This Unit
Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer. 6. Installing this Unit • Install this unit in a well-ventilated location.
Page 6: Table Of Contents
Before Use ... 14 Setting the Voltage Selector (Worldwide model only) ... 14 Installing the Remote’s Batteries... 14 Using the Remote Controller... 14 Getting to Know the DV-SP1000/ DV-SP1000E... 15 Front Panel... 15 Display ... 17 Rear Panel ... 18 Remote Controller ...
Page 7: Introduction
Dolby Laboratories. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. VLSC is a trademark of Onkyo Corporation. HDMI, the HDMI logo and High-Deﬁnition Multimedia Inter- face are trademarks or registered trademarks of HDMI Licens- ing, LLC.
Page 8: Supplied Accessories
DV-SP1000/DV-SP1000E’s power cord. (Adapter varies from country to country.) * In catalogs and on packaging, the letter added to the end of the product name indicates the color of the DV-SP1000/ DV-SP1000E. Speciﬁcations and operation are the same regardless of color.
Page 9: Disc Notes
Similarly, if a disc uses features that are not supported by the DV-SP1000/DV-SP1000E, for example, special interactive menu func- tions, this icon will appear onscreen, indicat- ing that the feature is not supported by the DV-SP1000/ DV-SP1000E.
Page 10: Disc Content Organization
• Discs must be ﬁnalized. • The DV-SP1000/DV-SP1000E can only recognize the ﬁrst session on multisession discs. • You can determine the order in which the DV-SP1000/ DV-SP1000E plays/displays your MP3 songs and JPEG pictures by preﬁxing ﬁle and folder names with a three-digit number.
Page 11: Cleaning Discs
Track 1 Track 2 Track 3 Track 1 MP3 (CD-R/CD-RW) ■ JPEG JPEG discs contain pictures organized into folders. On the DV-SP1000/DV-SP1000E, JPEG ﬁles as handled as tracks. Folder 1 Folder 2 Track 1 Track 2 Track 3 Track 1...
Page 12: Terminology
S-Video. ■ Composite video: A video connection format that combines the luminance and color signals together. ■ Direct Digital Path: Unique Onkyo technology that uses dedicated shielded cables to connect the digital audio outputs, protecting the digital output signals against the possibility of noise and interference.
Page 13 ■ Upsampling: The process of converting digital audio to a higher sampling rate. ■ VCD (Video CD): The format for storing MPEG1 video on CD. ■ VLSC (Vector Linear Shaping Circuitry): Unique Onkyo circuitry that reduces pulse noise in analog audio signals converted from digital sources.
Page 14: Before Use
VOLTAGE SELECTOR 220-230 V 120 V 12 V TRIGGER To use the remote controller, point it at the DV-SP1000/ 120 V DV-SP1000E’s remote control sensor, as shown below. Notes: • The remote controller may not work reliably if the • If another remote controller of the same type is used in •...
Page 15: Getting To Know The Dv-Sp1000/Dv-Sp1000E
STANDBY indicator (42) The Standby indicator lights up when the DV-SP1000/DV-SP1000E is set to Standby. STANDBY/ON button (42) This button is used to set the DV-SP1000/ DV-SP1000E to On or Standby. Display See “Display” on page 17 for more information.
Page 16 STANDBY indicator (42) The Standby indicator lights up when the DV-SP1000/DV-SP1000E is set to Standby. STANDBY/ON button (42) This button is used to set the DV-SP1000/ DV-SP1000E to On or Standby. Display See “Display” on page 17 for more information.
Page 17: Display
TOTAL indicator (63) This indicator appears while the total time is being displayed. IEEE 1394 indicator This indicator appears when the DV-SP1000/ DV-SP1000E is properly connected to an i.LINK (IEEE 1394) component. REMAIN indicator (63) This indicator appears while the remaining time is being displayed.
Page 18: Rear Panel
Getting to Know the DV-SP1000/DV-SP1000E Time display Time information, such as total time, remaining time, and so on, is displayed here in hours, minutes, and seconds. Other messages are also displayed. JPEG indicator This indicator appears while a JPEG picture is being displayed.
Page 19 To use you must make an analog audio connec- tion between the DV-SP1000/DV-SP1000E and your Onkyo AV receiver, even if they are connected digitally. D.MIX AUDIO OUT (30, 31, 38) These sockets output analog audio and can be con- nected to a stereo analog audio input on a TV, hi-ﬁ...
Page 20 To use you must make an analog audio connec- tion between the DV-SP1000/DV-SP1000E and your Onkyo AV receiver, even if they are connected digitally. D.MIX AUDIO OUT (30, 31, 38) These sockets output analog audio and can be con- nected to a stereo analog audio input on a TV, hi-ﬁ...
Page 21 Getting to Know the DV-SP1000/DV-SP1000E SURR MODE (AUDIO OUT) switch (37) This switch is used to set the surround output mode of the analog multichannel audio outputs. If you connect the SURR 2 outputs to a 7.1-channel AV receiver or amp, set this switch to 1+2. This reduces the output level by 3 dB.
Page 22 To use you must make an analog audio connec- tion between the DV-SP1000/DV-SP1000E and your Onkyo AV receiver, even if they are connected digitally. D.MIX AUDIO OUT (30, 31, 38) These sockets output analog audio and can be con- nected to a stereo analog audio input on a TV, hi-ﬁ...
Page 23: Dvd Mode
It’s also used when con- ﬁguring the remote controller for use with a TV or VCR. ON button (42) This button is used to turn on the DV-SP1000/ DV-SP1000E. STANDBY button (42) This button is used to set the DV-SP1000/ DV-SP1000E to Standby.
Page 24 Getting to Know the DV-SP1000/DV-SP1000E Play [ ] button (46) This button is used to start playback. Previous/Next [ The Previous [ ] button is used to select the pre- vious chapter or track. During playback it selects the beginning of the current chapter or track. The...
Page 25 Getting to Know the DV-SP1000/DV-SP1000E Controlling an Onkyo AV Receiver (Amp Mode) In Amp mode, the remote controller can be used to con- trol an Onkyo AV receiver connected to the DV-SP1000/ DV-SP1000E via . To select Amp mode, press the [AMP] MODE button.
Page 26: Connecting
Connecting This chapter explains how to connect the DV-SP1000/ DV-SP1000E to your other AV components. Before Making Any Connections • Read the manuals supplied with your AV components. • Don’t connect the power cord until you’ve completed all audio and video connections.
Page 27: Video Formats & Dv-Sp1000/Dv-Sp1000E Inputs & Outputs
Video Formats & DV-SP1000/DV-SP1000E Inputs & Outputs The DV-SP1000/DV-SP1000E supports several video input formats. The following table shows what’s output by each video output when each of the video inputs is selected. It also shows whether or not the video is upconverted to progres- sive video.
Page 28: Audio Formats & Dv-Sp1000/Dv-Sp1000E Outputs
Multichannel DVD-Audio will be down mixed to stereo. By default the DV-SP1000/DV-SP1000E plays the multichannel area, although you can change this (see page 80). When the i.LINK Output Setting is set to On, SACD audio is output from the i.LINK sockets, but not the analog audio outputs. When it’s set to Off, SACD audio is output from the analog audio outputs, but not the i.LINK sockets (see page 76).
Page 29: Audio Output Connections
Connecting Getting Connected If you’re not sure how to connect the DV-SP1000/DV-SP1000E to your other components, check what type of sockets they have and use the following map to locate the appropriate hookup information. ▼ Video Output Connections ▼ Components with an HDMI input - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 32 (F) ▼...
Page 30: Connecting A Standard Tv
Connecting Connecting a Standard TV This section shows how to connect the DV-SP1000/ DV-SP1000E to a standard TV, in which the TV handles both the video and audio. If your TV has a Dolby Pro Logic decoder built-in, you’ll be able to enjoy DVDs that bear the Dolby Surround logo.
Page 31: Connecting An Hdtv Or Projector
DV-SP1000/DV-SP1000E outputs video and audio from each output. D. Connecting an HDTV or Projector This section shows how to connect the DV-SP1000/ DV-SP1000E to an HDTV (plasma, LCD) or projector. Use a commercially available component video cable (BNC) to connect the DV-SP1000/DV-SP1000E’s HD VIDEO OUT COMPONENT socket to a component video input on your HDTV.
Page 32: Connecting A Scart-Compatible Tv (European Model Only)
Connecting E. Connecting a SCART-compatible TV (European model only) This section shows how to connect the DV-SP1000/ DV-SP1000E to a TV ﬁtted with a SCART socket. SCART is a convenient connection format because it carries video (RGB, S-Video, composite) and stereo ana- log audio all in a single cable.
Page 33 Digital Content Protection). Resolutions supported by the connected TV can be selected by pressing the [RESOLUTION] button (see page 66). On the DV-SP1000/DV-SP1000E, you can select a reso- lution suitable for use with the connected HDTV or pro- jector (see page 66).
Page 34: Connecting An Av Receiver's Video Inputs
Connecting Connecting an AV Receiver’s video Inputs This section shows how to connect the DV-SP1000/ DV-SP1000E’s video outputs to an AV receiver’s video inputs. Component video offers the best picture quality, so if your AV receiver supports it, use a commercially avail- able component video cable to connect the DV-SP1000/ DV-SP1000E’s COMPONENT VIDEO OUT to a com-...
Page 35: Connecting I.link-Compatible Components
Connecting J. Connecting i.LINK-compatible Components This section shows how to connect the DV-SP1000/ DV-SP1000E to an i.LINK-compatible component, such as an AV receiver. What is i.LINK? i.LINK is a brand name for IEEE 1394 serial connection format commonly used on computers, camcorders, and other AV equipment to carry digital It’s a bidirectional for-...
Page 36: Connecting To An Av Receiver's Audio Inputs
Connecting to an AV Receiver’s Audio Inputs This section shows how to connect the DV-SP1000/ DV-SP1000E’s audio outputs to an AV receiver’s audio inputs. K. Digital Audio Connection (Dolby Digital &...
Page 37: Analog Audio Connection
(Dolby Digital, DTS, DVD-Audio & SACD) To fully enjoy the multichannel audio of DVD-Audio and SACD, you need to connect the DV-SP1000/ DV-SP1000E’s 5.1-channel analog audio output to a multichannel analog audio input on an AV receiver. Dolby Digital and DTS soundtracks can also be fully enjoyed with this type of connection.
Page 38: Connecting A Stereo Amp
VCDs will sound better too. You can also enjoy Dolby Surround, if your receiver supports Dolby Pro Logic. M. Analog Connection Use an RCA audio cable to connect the DV-SP1000/ DV-SP1000E’s D.MIX AUDIO OUT to a stereo analog audio input on your amp or receiver. RS 232...
Page 39: Connecting Standard Video Equipment For Progressive Upconversion (Not Canadian Model)
If your TV supports progressive scanning, you can con- nect another video component (satellite/cable tuner, LD player, etc.) to the DV-SP1000/DV-SP1000E and it will upconvert interlaced video to progressive. This is also useful when your TV doesn’t have enough video inputs to connect all of your components.
Page 40: Connecting Components With
(RCA) between the DV-SP1000/DV-SP1000E and Onkyo AV receiver, even if they are already connected digitally. • The DV-SP1000/DV-SP1000E has two You can connect either one to the Onkyo AV receiver. The other socket is for connecting additional compatible components. • Connect the DV-SP1000/DV-SP1000E’s to only Onkyo components.
Page 41: Connecting The Power Cord
Miniplug IR Emitter DV-SP1000/ DV-SP1000E Only remote controller signals received by the DV-SP1000/DV-SP1000E’s IR IN are fed through to the IR OUT. Signals picked up by the DV-SP1000/ DV-SP1000E’s remote control sensor are not. Connecting the Power Cord Notes: • Before connecting the power cord, complete all of the necessary audio and video connections.
Page 42: Turning On The Dv-Sp1000/Dv-Sp1000E
Press the [STANDBY/ON] button. STANDBY/ON The display light ups and the STANDBY indicator goes off. The very ﬁrst time you turn on the DV-SP1000/DV-SP1000E, the Initial Setup menu appears onscreen (see page 43). Press the [STANDBY/ON] button again to enter Standby.
Page 43: Initial Setup
SUBTITLE ANGLE RESOLUTION First Time Setup The very ﬁrst time you turn on the DV-SP1000/ DV-SP1000E, the Initial Setup menu appears onscreen. Here you need to make a few settings to get the DV-SP1000/DV-SP1000E up and running. You can change these settings later (see page 68).
Page 44 • When a DVD doesn’t have menus, soundtracks, and subtitles in different languages, its default language is used. • When the DV-SP1000/DV-SP1000E is plugged in and set to Standby, it automatically checks if it’s con- nected to any other i.LINK components. If it is, the default setting for the i.LINK Output Setting becomes...
Page 45: Basic Playback
12 cm discs. To avoid damaging your discs and the DV-SP1000/DV-SP1000E, put the disc in the center of the disc bay. • Only load discs that are supported by the DV-SP1000/ DV-SP1000E (see page 9). Don’t load cartridge-type discs. • To avoid personal injury, keep your hands away from the disc tray as it closes.
Page 46: Starting, Pausing & Stopping Playback
LEARNING JPEG • With the Last Memory function you can resume play- • Do not move the DV-SP1000/DV-SP1000E or subject • You can improve the picture quality of paused play- indica- • Prolonged display of the same picture or menu may •...
Page 47: Navigating Disc Menus
Basic Playback STANDBY INPUT TV CH TV VOL + 10 CLEAR SEARCH MEMORY DIMMER AMP INPUT INPUT AMP INPUT MODE PICTURE ZOOM ON CONTROL ENTER AUDIO ZOOM ENTER L MODE DISPLAY MUTING LAST MEMORY STEP/SLOW RANDOM AUDIO SUBTITLE ANGLE RESOLUTION AUDIO SBTTL ANGLE...
Page 48: Selecting Chapters & Titles By Number
Basic Playback STANDBY Number buttons + 10 SEARCH MEMORY SEARCH ZOOM ON AUDIO ZOOM L MODE DISPLAY LAST MEMORY AUDIO SUBTITLE AUDIO REPEAT REPEAT VIDEO INPUT VIDEO OFF V IN OPEN/CLOSE Selecting Chapters & Titles by Number DVD-V DVD-VR With the Search function you can select chapters and titles by number.
Page 49: Selecting Tracks By Number
Basic Playback STANDBY INPUT TV CH Number buttons TV VOL + 10 CLEAR SEARCH MEMORY DIMMER AMP INPUT SEARCH INPUT AMP INPUT MODE PICTURE ZOOM ON CONTROL AUDIO ZOOM ENTER L MODE DISPLAY MUTING LAST MEMORY STEP/SLOW RANDOM AUDIO SUBTITLE ANGLE RESOLUTION AUDIO...
Page 50: Fast Forward & Reverse
] buttons. cause irreparable damage to your TV screen known as screen burn-in. To prevent this, don’t display the same frame for too long. The DV-SP1000/DV-SP1000E features a screen saver to protect your TV from the effects of burn-in (page 82).
Page 51: Slow-Motion Playback
Basic Playback STANDBY INPUT TV CH TV VOL + 10 CLEAR SEARCH MEMORY DIMMER AMP INPUT INPUT AMP INPUT MODE PICTURE ZOOM ON CONTROL AUDIO ZOOM ENTER L MODE DISPLAY MUTING LAST MEMORY STEP/SLOW RANDOM AUDIO SUBTITLE ANGLE RESOLUTION AUDIO SBTTL ANGLE RSLTN...
Page 52: Navigating Mp3 Discs
Pressing the Play [ ] button at this point will play all tracks in all folders in hierarchical order. The DV-SP1000/DV-SP1000E num- bers folders and tracks in hierarchical order. You can use these numbers to select folders and tracks directly with the Search function (see page 49).
Page 53: Viewing A Slideshow Of Jpeg Images
Pressing the Play [ ] button at this point will start a slideshow of all images in all folders in hierarchical order. The DV-SP1000/DV-SP1000E num- bers folders and ﬁles in hierarchical order. To open a folder, use the Up and...
Page 54: Making A Playlist With The Disc Navigator
Notes: • If the folder containing the JPEG images also contains some MP3 tracks, the DV-SP1000/DV-SP1000E will play those tracks while showing the slideshow. • If the selected JPEG ﬁle’s resolution is 640 x 480 pix- els or less, a thumbnail-size preview is shown.
Page 55 Basic Playback To add a ﬁle to the playlist, use the [ ], [ ], [ ], [ Remote controller select it in the Track list, and then press the [ENTER] button. ENTER To add an entire folder to the playlist, select the folder at the top of the Track list and press [ENTER].
Page 56: Advanced Playback
Advanced Playback STANDBY Number buttons + 10 SEARCH MEMORY SEARCH AMP INPUT MODE ZOOM ON ZOOM ON AUDIO ZOOM +/– ZOOM ENTER L MODE DISPLAY LAST MEMORY STEP/SLOW AUDIO SUBTITLE Zooming DVD-VR DVD-V With the Zoom function you can enlarge any part of the picture.
Page 57: Repeat Playback
Advanced Playback STANDBY INPUT TV CH TV VOL + 10 CLEAR SEARCH MEMORY DIMMER AMP INPUT INPUT AMP INPUT MODE PICTURE ZOOM ON CONTROL AUDIO ZOOM ENTER L MODE DISPLAY MUTING LAST MEMORY STEP/SLOW RANDOM AUDIO SUBTITLE ANGLE RESOLUTION AUDIO SBTTL ANGLE RSLTN...
Page 58: Random Playback
Advanced Playback + 10 CLEAR SEARCH MEMORY DIMMER AMP INPUT AMP INPUT MODE ZOOM ON AUDIO ZOOM ENTER L MODE DISPLAY LAST MEMORY STEP/SLOW AUDIO SUBTITLE ANGLE AUDIO SBTTL ANGLE REPEAT REPEAT VIDEO INPUT VIDEO OFF V IN V OFF OPEN/CLOSE RC-563DV Random Playback...
Page 59: Memory Playback
Advanced Playback TV VOL + 10 Clear MEMORY Search Memory Dimmer Amp Input Input Amp Input Mode Picture Control Zoom On ENTER Audio Zoom Enter L Mode Display Muting Last Memory Step/Slow Random Audio Subtitle Angle Resolution Audio Subtitle Angle Rsltn Repeat Aspect...
Page 60 To stop playback, press the Stop ] button. Remote controller Notes: • The playlist is deleted when the DV-SP1000/ DV-SP1000E is set to Standby. • To use this function with a VCD that supports PBC, you must ﬁrst turn off PBC (see page 84).
Page 61: Selecting Camera Angles
Remote controller button. MEMORY Notes: • The playlist is deleted when the DV-SP1000/ DV-SP1000E is set to Standby. • To use this function with a VCD that supports PBC, you must ﬁrst turn off PBC (see page 84). Selecting Camera Angles...
Page 62: Selecting Soundtracks
Advanced Playback + 10 CLEAR SEARCH MEMORY DIMMER AMP INPUT AMP INPUT MODE ZOOM ON AUDIO ZOOM ENTER L MODE DISPLAY LAST MEMORY STEP/SLOW AUDIO SUBTITLE ANGLE AUDIO AUDIO SBTTL ANGLE REPEAT REPEAT VIDEO INPUT VIDEO OFF V IN V OFF OPEN/CLOSE RC-563DV Selecting Soundtracks...
Page 63: Last Memory
• The Last Memory function may not work with some DVDs. • If you inadvertently turn off the DV-SP1000/ DV-SP1000E during playback, you can resume play- back from the last point simply by pressing the Play [ ] button.
Page 64 As above plus number of audio channels. Current/total track number, elapsed disc time, remaining disc time, total disc time. Title, artist name, album name. DV-SP1000/ DV-SP1000E Display Elapsed title time Remaining title time Elapsed chapter time Elapsed title time DV-SP1000/...
Page 65 Current/Total track number, elapsed track time, current/total folder number, ﬁle name, etc. Title, artist name, album name, year, genre, comment. Disc Navigator DV-SP1000/ DV-SP1000E Display Elapsed track time Remaining track time Elapsed disc time Remaining disc time Elapsed track time...
Page 66: Turning Off The Video Circuits
TV or projector is connected to the HDMI OUT. Remote controller Notes: • With HDMI, the TV reports to the DV-SP1000/ • The letters i and p indicate interlaced and progressive Selecting the Video Input Source (not Canadian model)
Page 67: Setting The Picture's Aspect Ratio
16:9 widescreen TV. Notes: • The aspect ratio cannot be changed during playback. • When the DV-SP1000/DV-SP1000E is set to Standby, the aspect ratio reverts to the TV Shape setting (see page 72). Using the Picture Control Menu...
Page 68: Configuring The Dv-Sp1000/ Dv-Sp1000E
Picture adjustments for progressive scanning. Selects the video format for the SCART output: RGB, S-Video, or composite. Specify how the DV-SP1000/DV-SP1000E outputs video signals when playing NTSC discs. Determines whether Dolby Digital audio is downmixed. Determines whether DTS audio is downmixed.
Page 69: Conﬁguring The Dv-Sp1000/Dv-Sp1000E
Turns PBC (Playback Control) for VCDs on and off. Determines what’s played on DVD-Audio discs with DVD-Video content. Sets the Auto power off function. This is the menu that appears automatically the very ﬁrst time the DV-SP1000/DV-SP1000E is turned on. Page #...
Page 70: Using The Onscreen Setup Menus
OPEN/CLOSE RC-563DV Using the Onscreen Setup Menus This section explains how to use the onscreen setup menus. Turn on the DV-SP1000/ DV-SP1000E and your TV. On your TV, select the video input to which the DV-SP1000/DV-SP1000E is connected. Press the [SETUP] button.
Page 71 Conﬁguring the DV-SP1000/DV-SP1000E The following diagram shows how to navigate the onscreen setup menus.
Page 72: Interlaced Setting
Conﬁguring the DV-SP1000/DV-SP1000E Picture Menu TV Shape With this setting you can select a picture format to match the aspect ratio of your TV. 4:3 Letter box (default): Choose this option if you have a 4:3 TV. When you watch widescreen movies, the entire picture will be visible but there will be black bars at the top and bot- tom of the screen, as shown.
Page 73: Progressive Setting
Conﬁguring the DV-SP1000/DV-SP1000E STANDBY INPUT TV CH TV VOL + 10 CLEAR SEARCH MEMORY DIMMER AMP INPUT INPUT AMP INPUT MODE PICTURE ZOOM ON CONTROL ENTER AUDIO ZOOM ENTER L MODE DISPLAY MUTING LAST MEMORY STEP/SLOW RANDOM AUDIO SUBTITLE ANGLE...
Page 74: European Model Only
• When RGB is selected, nothing is output by the com- ponent video output (see page 27). PAL Output Setting (not North American models) With this setting you can specify how the DV-SP1000/ DV-SP1000E outputs video signals when playing NTSC discs format...
Page 75: Dolby Digital Out
DVD-V DVD-A DVD-VR With this setting you can conﬁgure the DV-SP1000/ DV-SP1000E to output digital audio with a high sam- pling rate (e.g., 96 kHz) as it is or to downsample it to 48 kHz. This setting applies to the DIGITAL 1 and DIG- ITAL 2 AUDIO OUTs.
Page 76: I.link Output Setting
Select this option if you’re using the i.LINK sockets. Notes: • When the DV-SP1000/DV-SP1000E is plugged in and set to Standby, it automatically checks if it’s con- nected to any other i.LINK components. If it is, the default setting for the i.LINK Output Setting becomes...
Page 77 Conﬁguring the DV-SP1000/DV-SP1000E STANDBY INPUT TV CH TV VOL + 10 CLEAR SEARCH MEMORY DIMMER AMP INPUT INPUT AMP INPUT MODE PICTURE ZOOM ON CONTROL ENTER AUDIO ZOOM ENTER L MODE DISPLAY MUTING LAST MEMORY STEP/SLOW RANDOM AUDIO SUBTITLE ANGLE...
Page 78: Setting The Speaker Distances
Conﬁguring the DV-SP1000/DV-SP1000E Use the Up and Down [ buttons to select Surround Remote controller Speaker, press the [ENTER] but- ton, use the Left ] buttons to select an option, ENTER and then press the [ENTER] but- ton. Large: Select if the surround speakers are large.
Page 79: Av Synchronization
Conﬁguring the DV-SP1000/DV-SP1000E Setting Levels With the Test Tone Use the Up Down [ buttons to select Test Tone, and Remote controller then press the [ENTER] button. The Test Tone settings appear onscreen. ENTER Use the Up Down [ buttons to select each speaker,...
Page 80: Sacd Audio Setup
0–100 ms 50 ms With this setting you can determine how SACDs are 50 ms played by the DV-SP1000/DV-SP1000E. Notes: • If Multi ch Area is selected, and an SACD that con- CD Audio Setup This setting conﬁgures the digital audio outputs for use with normal CDs or DTS CDs.
Page 81: On-Screen Language
Conﬁguring the DV-SP1000/DV-SP1000E Language Menu (These menus vary slightly from country to country.) On-Screen Language With this setting you can select a language for the onscreen setup menus and messages. For North American, European, and Australian models: English English (default): French Français:...
Page 82: Subtitle Language
Conﬁguring the DV-SP1000/DV-SP1000E Subtitle Language DVD-V With this setting you can specify your preferred lan- guage for subtitles. When you play a DVD-Video disc with multiple language subtitles, your preferred lan- guage will be selected automatically. For North American, European, and Australian models:...
Page 83: Remote Conﬁrmation
Conﬁguring the DV-SP1000/DV-SP1000E Parental Lock DVD-V With the Parental Lock function you can block access to certain scenes that the authors have ﬂagged as being unsuitable for children. STANDBY Input INPUT TV CH TV CH Number buttons TV VOL TV VOL...
Page 84: Initial Setup Menu
Auto power off function on. Initial Setup Menu This menu appears automatically the very ﬁrst time the DV-SP1000/DV-SP1000E is turned on. See “First Time Setup” on page 43 for more information. Selecting Other Languages This section explains how to select other languages for disc menus, audio, and subtitles.
Page 85: Language Code List
Conﬁguring the DV-SP1000/DV-SP1000E Language Code List Use this list when specifying other languages. Language Code Language Japanese Kirghiz English Latin French Lingala German Laothian Italian Lithuanian Spanish Latvian Chinese Malagasy Dutch Maori Portuguese Macedonian Swedish Malayalam Russian Mongolian Korean Moldavian...
Page 86: Controlling Other Components
Controlling Other Components In addition to controlling the DV-SP1000/DV-SP1000E, the remote controller can also be used to control your TV and VCR. To do this you need to enter the appropriate control codes for your TV and VCR. The remote control- ler can also learn individual commands from another remote controller (see page 91).
Page 87: Remote Control Codes
Controlling Other Components Remote Control Codes When two or more codes are given, try each one in turn, and choose the one that works best. Manufacturer Control code Admiral 1026, 1040, 1062 Akai 1002, 1067 Akura 1045 Alba 1035, 1043 Amplivision 1063 Amstrad...
Page 88 Controlling Other Components Manufacturer Control code Pioneer 1004, 1006, 1027, 1062 Portland 1004, 1005, 1006, 1025 Price Club 1022 Prism 1012 Profex 1035 Proline 1049 Proscan 1001, 1034 Protech 1035, 1045, 1063 Proton 1004, 1006, 1007 1037 Quasar 1003, 1012, 1031 1036, 1039, 1054, 1055, Quelle 1058, 1059, 1068...
Page 89 Controlling Other Components Manufacturer Control code 2005, 2006, 2007, 2008, JC Penney 2010, 2011, 2013, 2014, 2021 Jensen 2013 2005, 2006, 2007, 2009, 2032, 2035, 2040, 2048 Kaisui 2033 Kendo 2041, 2046 Kenwood 2005, 2006, 2007, 2009 Kodak 2010 Loewe 2028, 2034 Logik 2028, 2043...
Page 90: Controlling A Vcr
Controlling Other Components Controlling a TV STANDBY STANDBY Number buttons + 10 CLEAR SEARCH MEMORY DIMMER AMP INPUT AMP INPUT MODE ZOOM ON AUDIO CH + – ZOOM ENTER L MODE DISPLAY STEP/SLOW LAST MEMORY AUDIO SUBTITLE ANGLE AUDIO SBTTL ANGLE REPEAT REPEAT...
Page 91: Learning The Commands Of Other Remote Controllers
30 seconds. • The DV-SP1000/DV-SP1000E’s remote controller comes preprogrammed with the commands necessary for controlling Onkyo DVD players (DVD mode) and AV receivers (Amp mode). However, you can repro- gram individual buttons if necessary. The original commands can be restored by resetting the remote controller.
Page 92: Deleting The Learnt Commands Of One Mode
Controlling Other Components Deleting the Learnt Commands of One Mode This section explains how to delete the learnt commands of one mode: DVD, Amp, VCR, or TV. STANDBY INPUT TV CH TV VOL + 10 CLEAR SEARCH MEMORY DIMMER AMP INPUT INPUT AMP INPUT MODE...
Page 93: Troubleshooting
31). Check the video cable and correct as necessary (pages 30, 31). See page 27 for details on how the DV-SP1000/ DV-SP1000E outputs video from each output. On your hi-ﬁ amp or AV receiver, select the input to which the DV-SP1000/DV-SP1000E is connected (pages 36, 38).
Page 94 OK but those on the remote controller don’t? This is because the i.LINK Output Setting is set to Off. If the DV-SP1000/DV-SP1000E is properly connected to an i.LINK component and an SACD is loaded, the IEEE 1394 indica- tor will ﬂash.
Page 95 ■ Restoring the Default Settings To reset the DV-SP1000/DV-SP1000E to its factory defaults, turn it on and, while holding down the Stop [ ] button, press the [STANDBY/ON] button. “Initialize” appears on the display. When the reset is complete, “Complete” is...
Page 96: Specifications
ONKYO CHINA LIMITED Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 SN 29343646A (C) Copyright 2004 ONKYO CORPORATION Japan. All rights reserved. NTSC PAL/NTSC 1.0 V(p-p)/75 Ω negative sync, RCA/phono Y: 1.0 V(p-p)/75 Ω...

This manual is also suitable for:

Dv-sp1000e

Onkyo DV-SP1000 Instruction Manual

Important Safety Instructions

Precautions

Introduction

Before Use

Getting to Know the DV-SP1000/DV-SP1000E

Connecting

Initial Setup

Basic Playback

Advanced Playback

Configuring the DV-SP1000/ DV-SP1000E

Controlling Other Components

Troubleshooting

Specifications

Quick Links

Need help?

Questions and answers

Related Manuals for Onkyo DV-SP1000

Summary of Contents for Onkyo DV-SP1000

This manual is also suitable for:

Table of Contents