Onkyo DV-SP1000 Instruction Manual page 20

Getting to Know the DV-SP1000/DV-SP1000E
■ Canadian Model
RS 232 HDMI
OUT
S400
( AUDIO )
1 1 + 2
SURR MODE
( AUDIO OUT )
For detailed information, refer to the pages in parenthesis.
i.LINK S400 (AUDIO) (35)
These sockets can output up to
to 192 kHz/24-bit digital audio in
and can be connected to the i.LINK
compatible AV receiver or other component. The
actual output signal depends on the disc currently
playing. Since
tion, connected components can talk to each
other for optimal setup and perfectly synchro-
nized audio transmission.
RS 232
This bidirectional RS-232 port can be connected to
an external controller.
HDMI OUT (32)
This HDMI socket outputs digital video and audio
and can be connected to an HDMI input on a com-
patible TV or other component.
VIDEO OUT COMPONENT (Y, P
These sockets output component video and can be
connected to a component video input on a TV or
projector. They output only interlaced video.
VIDEO OUT S VIDEO (30)
These two sockets output S-Video and can be con-
nected to an S-Video input on a TV or projector.
VIDEO OUT VIDEO (30)
These two sockets output composite video and can
be connected to a composite video input on a TV or
projector.
DIGITAL 1 AUDIO OUT (36, 38)
These sockets output digital audio and can be con-
nected to the digital audio input on a hi-fi amp, AV
receiver, surround sound decoder (Dolby Digital,
DTS), or other component. There's a coaxial output
and an optical output.
20
VIDEO OUT
AUDIO OUT
COMPONENT
DIGITAL 1
Y
P
B
COAXIAL OPTICAL
P
R
S VIDEO VIDEO
six channels and up
i.LINK format
sockets
i.LINK is a bidirectional connec-
, P
R
D. MIX FRONT
DIGITAL 2
L
R
REMOTE
CONTROL
COAXIAL OPTICAL
AUDIO OUT
HD VIDEO OUT
COMPONENT
Y
DIGITAL 2 AUDIO OUT (36, 38)
These sockets output digital audio and can be con-
nected to the digital audio inputs on a hi-fi amp, AV
receiver, surround sound decoder (Dolby Digital,
DTS), or other component. There's a coaxial output
on a
and an optical output.
These
nected to the
ponents for interactive control.
To use
tion between the DV-SP1000/DV-SP1000E and
your Onkyo AV receiver, even if they are connected
digitally.
D.MIX AUDIO OUT (30, 31, 38)
These sockets output analog audio and can be con-
nected to a stereo analog audio input on a TV, hi-fi
amp, or other component. If the source audio is
multichannel (Dolby Digital, DTS, DVD-Audio,
) (30)
SACD), they output a 2-channel downmix.
B
FRONT, SURR 1, CENTER & SUBWOOFER
AUDIO OUT (37)
These sockets output 5.1-channel analog audio and
can be connected to a 5.1-channel analog audio
input on an AV receiver, surround sound decoder
(Dolby Pro Logic), or other component.
SURR 2 AUDIO OUT (37)
These sockets output the same analog audio as the
SURR1 outputs and can be connected to the analog
surround back left and right inputs on a 7.1-channel
AV receiver or other component. When using these
sockets, the SURR MODE switch should be set to
1+2.
SURR 1 CENTER SURR 2
L
R
SUB
WOOFER
P P
B R
REMOTE CONTROL (40)
(Remote Interactive) sockets can be con-
sockets on other Onkyo AV com-
you must make an analog audio connec-
SUPER AUDIO CD & DVD AUDIO/
VIDEO PLAYER
DV - SP 1000
MODEL NO.
AC INLET