Onkyo DV-SP1000 Instruction Manual page 21

Getting to Know the DV-SP1000/DV-SP1000E
SURR MODE (AUDIO OUT) switch (37)
This switch is used to set the surround output mode
of the analog multichannel audio outputs. If you
connect the SURR 2 outputs to a 7.1-channel AV
receiver or amp, set this switch to 1+2. This reduces
the output level by 3 dB. If you're not using the
SURR 2 outputs, set this switch to 1.
■ Other Models
RS 232 HDMI
Y
OUT
P
B
P
R
VIDEO IN
S400
( AUDIO )
S VIDEO
VIDEO
1 1 + 2
SURR MODE
(AUDIO OUT)
i.LINK S400 (AUDIO) (35)
These sockets can output up to
to 192 kHz/24-bit digital audio in
and can be connected to the i.LINK
compatible AV receiver or other component. The
actual output signal depends on the disc currently
i.LINK is a bidirectional connec-
playing. Since
tion, connected components can talk to each
other for optimal setup and perfectly synchro-
nized audio transmission.
RS 232
This bidirectional RS-232 port can be connected to
an external controller.
HDMI OUT (32)
This HDMI socket outputs digital video and audio
and can be connected to an HDMI input on a com-
patible TV or other component.
VIDEO IN S VIDEO (39)
This input accepts S-Video and can be connected to
an S-Video output on a TV, camcorder, or other
component.
When the video input source is set to EXTERNAL,
video signals received here are upconverted to pro-
gressive video and output by the HD VIDEO OUT
COMPONENT output.
VIDEO IN VIDEO (39)
This input accepts composite video and can be con-
nected to a composite video output on a TV, cam-
corder, or other component.
VIDEO OUT
AUDIO OUT
COMPONENT
DIGITAL 1 DIGITAL 2
COAXIAL OPTICAL COAXIAL OPTICAL
S VIDEO VIDEO
six channels and up
i.LINK format
on a
sockets
HD VIDEO OUT COMPONENT (31)
These RCA sockets output HD component video
and can be connected to the HD component video
input on an HDTV or projector.
AC INLET (41)
The supplied power cord should be connected here.
IR
D. MIX FRONT SURR 1 CENTER SURR 2
IN
L L
R R
OUT
REMOTE
SUB
CONTROL
WOOFER
AUDIO OUT
HD VIDEO OUT
COMPONENT
Y P P
B R
12 V
TRIGGER
IN
When the video input source is set to EXTERNAL,
video signals received here are upconverted to pro-
gressive video and output by the HD VIDEO OUT
COMPONENT output.
VIDEO OUT COMPONENT (Y, P
These sockets output component video and can be
connected to a component video input on a TV or
projector. They output only interlaced video.
VIDEO OUT S VIDEO (30)
These two sockets output S-Video and can be con-
nected to an S-Video input on a TV or projector.
VIDEO OUT VIDEO (30)
These two sockets output composite video and can
be connected to a composite video input on a TV or
projector.
DIGITAL 1 AUDIO OUT (36, 38)
These sockets output digital audio and can be con-
nected to the digital audio input on a hi-fi amp, AV
receiver, surround sound decoder (Dolby Digital,
DTS), or other component. There's a coaxial output
and an optical output.
DIGITAL 2 AUDIO OUT (36, 38)
These sockets output digital audio and can be con-
nected to the digital audio inputs on a hi-fi amp, AV
receiver, surround sound decoder (Dolby Digital,
DTS), or other component. There's a coaxial output
and an optical output.
SUPER AUDIO CD & DVD AUDIO/
VIDEO PLAYER
DV-SP 1000
MODEL NO.
AC INLET
, P ) (30)
R B
21