Remote Controller; Dvd Mode - Onkyo DV-SP1000 Instruction Manual

Getting to Know the DV-SP1000/DV-SP1000E

Remote Controller

The DV-SP1000/DV-SP1000E's remote controller is a
multipurpose device that can be used to control not just
the DV-SP1000/DV-SP1000E but an Onkyo AV
receiver, TV, and VCR. This section explains how it's
used to control the DV-SP1000/DV-SP1000E or an
Onkyo AV receiver. See page 90 for information on
using it to control TVs and VCRs.
Controlling the DV-SP1000/DV-SP1000E

(DVD Mode)

In DVD mode, the remote controller controls the
DV-SP1000/DV-SP1000E. To select DVD mode, press
the [DVD] MODE button.
ON STANDBY
1 2
4 5
7 8
+ 10
0
SEARCH MEMORY
S M
AMP INPUT
DVD V1
MODE
DVD AMP
ZOOM ON
AUDIO
SEL
+
CH
ZOOM ENTER
L MODE
-
DISPLAY
LAST MEMORY STEP/SLOW
REC
LM
AUDIO SUBTITLE
AUDIO SBTTL
REPEAT A - B
A - B
REPEAT
VIDEO INPUT VIDEO OFF
V IN V OFF
OPEN/CLOSE
RC - 563DV
TV
I INPUT
+
3
TV CH
-
6
9
TV VOL
CLEAR
DIMMER AMP INPUT
D
INPUT
V2 V3
VCR TV
PICTURE
CONTROL
VOL
MUTING
RANDOM
RD
ANGLE RESOLUTION
ANGLE RSLTN
ASPECT
ASPECT
LEARNING
L1 L 2
L 3 L 4
For detailed information, refer to the pages in parenthesis.
Tx/Learn indicator (86)
This indicator lights up when the remote controller
is transmitting commands. It's also used when con-
figuring the remote controller for use with a TV or
VCR.
ON button (42)
This button is used to turn on the DV-SP1000/
DV-SP1000E.
STANDBY button (42)
This button is used to set the DV-SP1000/
DV-SP1000E to Standby.
Number buttons (48, 49, 56)
These buttons are used to enter title, chapter, group,
and track numbers and to enter times for locating
specific points in time.
To enter a single-digit number, simply press the cor-
responding button. To enter a double-digit number,
enter the numbers in order from left-to-right (e.g., to
enter 14, press [1] then [4].
The [+10] button is used to enter multiples of ten
(i.e., 10, 20, 30, and so on). For example, to enter
the number 25, press the [+10] button twice fol-
lowed by the [5] button.
DIMMER button (51)
This button is used to adjust the display brightness.
SEARCH button (48, 49, 56)
This button is used to search for titles, chapters,
groups, tracks, and specific points in time.
MEMORY button (59)
This button is used with the Memory function.
DVD MODE button
This button is used to select the remote controller's
DVD mode.
ZOOM ON button (56)
This button is used to turn the Zoom function on
and off.
Arrow [ ]/[ ]/[ ]/[
(43)
The arrow buttons are mainly used to navigate
onscreen menus. The [ENTER] button is used to
confirm choices.
ZOOM [+/–] button (56)
This button is used with the Zoom function to zoom
in and out.
RETURN button (47, 52, 70)
This button is used to return to the previously dis-
played onscreen setup menu.
DISPLAY button (63)
This button is used to display information about the
current disc, title, chapter, group, or track, including
the elapsed time, remaining time, total time, and so
on.
] & ENTER buttons
23