Connecting A Scart-Compatible Tv (European Model Only); Connecting A Component With An Hdmi Input - Onkyo DV-SP1000 Instruction Manual

Connecting
E. Connecting a SCART-compatible
TV (European model only)
This section shows how to connect the DV-SP1000/
DV-SP1000E to a TV fitted with a SCART socket.
SCART is a convenient connection format because it
carries video (RGB, S-Video, composite) and stereo ana-
log audio all in a single cable. If your TV has a Dolby Pro
Logic decoder built-in, with a SCART connection you'll
be able to enjoy DVDs that bear the Dolby Surround
logo.
Use the supplied SCART cable to connect the
DV-SP1000/DV-SP1000E's AV CONNECTOR to a
SCART socket on your TV.
RS 232 HDMI VIDEO OUT
Y
OUT
P B
P R
VIDEO IN
S400
(AUDIO)
S VIDEO
VIDEO S VIDEO
+
1 1 2
SURR MODE
(AUDIO OUT)
AV CONNECTOR
SCART cable
(supplied)
Notes:
• The DV-SP1000/DV-SP1000E's SCART socket can
output RGB, S-Video, or composite video. The default
setting is composite video. If your TV's SCART
socket supports RGB or S-Video (check your TV's
manual), you can change this setting and enjoy better
picture quality (see page 74).
• See the tables on page 27 for details on how the
DV-SP1000/DV-SP1000E outputs video and audio
from its SCART socket.
32
AUDIO OUT IR D. MIX FRONT
COMPONENT
DIGITAL 1 DIGITAL 2
IN
L
R
OUT
REMOTE
CONTROL
COAXIAL OPTICAL COAXIAL OPTICAL
AUDIO OUT
HD VIDEO OUT
COMPONENT
Y
AV CONNECTOR
VIDEO
TV
F. Connecting a Component with an
HDMI Input
This section shows how to connect the DV-SP1000/
DV-SP1000E to a AV receiver, HDTV, or projector that
has an HDMI input socket.
What is HDMI?
HDMI (High Definition Multimedia Interface) is a new
connection format that can carry uncompressed, stan-
dard or high definition digital video and up to eight chan-
nels of digital audio. Until now, several separate video
and audio cables have been required to connect AV com-
ponents together. With HDMI, a single cable is all that's
necessary to achieve the best picture and audio quality.
SURR 1 CENTER SURR 2
HDMI video is compatible with DVI (Digital Visual
L
Interface). To send HDMI video to a DVI input requires
R
SUB
WOOFER
an HDMI-to-DVI cable. The DV-SP1000/DV-SP1000E
P B P R
supports HDCP (High-bandwidth Digital Content Pro-
12 V
TRIGGER
IN
tection), and for an HDMI-to-DVI connection to work,
the other component must also support it. Note that this
may not work with some DVI components.
Using HDMI
Use the supplied HDMI cable to connect the
DV-SP1000/DV-SP1000E's HDMI OUT to an HDMI
input on your AV receiver. Alternatively, you can connect
the DV-SP1000/DV-SP1000E directly to the HDMI
input on your TV.
HDMI
OUT
RS 232
S400
(AUDIO)
1
SURR MODE
(AUDIO OUT)
Notes:
• Use the Digital Out/Digital 2 settings to match the
HDMI output format with your HDTV (see page 75).
• The DV-SP1000/DV-SP1000E supports HDCP
(High-bandwidth Digital Content Protection), a pro-
tection system for digital video. HDMI components
that you connect to the DV-SP1000/DV-SP1000E
must also support HDCP.
HDMI
IN
HDMI cable
(supplied)
HDMI VIDEO OUT
AUDIO OUT
COMPONENT
DIGITAL 1 DIGITAL 2
Y
OUT
P
B
COAXIAL OPTICAL COAXIAL OPTICAL
P
R
VIDEO IN
S VIDEO
S VIDEO VIDEO
VIDEO
+
1 2
Signal flow
HDTV, projector
IR
D. MIX FRONT SURR 1 CENTER SURR 2
IN
L L
R R
OUT
REMOTE SUB
CONTROL WOOFER
AUDIO OUT
HD VIDEO OUT
COMPONENT
Y P B P R
12 V
TRIGGER
IN