Turning Off The Video Signal Output - Onkyo DVD Audio/Video Player DV-S939 Instruction Manual

Turning Off the Video
Signal Output
The DVD-Player can be set playing audio
exclusively. In this case, you can obtain sound of
better quality, as the DVD Player does not process
video signals. (All the video output jacks send no
video signals.)
DVD-V DVD-A
VCD CD
Switching the video signal off
Press VIDEO CIRCUIT OFF on the
DVD Player
DVD Player or V.OFF on the remote
V I D E O C I R C U I T
O F F
controller repeatedly.
The VIDEO OFF indicator appears on the display.
To turn on the video circuitry, press the button
again.
Remote
controller
S TA N D B Y / O N
V I DE O CI RCUI T
OF F
STANDBY
POWER
48/44.1 96/88.2 192/176.4
ON OFF
VIDEO CIRCUIT OFF
Notes
• Some discs cannot be played without some on-screen menu interaction.
If this is the case, be sure to perform the on-screen procedures as
indicated before turning off the video signal processing circuitry.
• The VIDEO CIRCUIT OFF setting is canceled whenever the DVD
Player is turned off.
V.OFF
43