Configuring The Dv-Sp1000/ Dv-Sp1000E - Onkyo DV-SP1000 Instruction Manual

Configuring the DV-SP1000/DV-SP1000E
This chapter explains the various settings on the onscreen setup menus. Settings are arranged into six groups: Picture,
Audio, Language, Display, Operation, and Initial Setup. The following table lists all of the settings, with a brief descrip-
tion and page number where you can find full details. (Certain settings cannot be selected or changed during playback.)
Menu Setting
TV Shape
Picture
Interlaced Setting
Progressive Setting
SCART Output Setting (European
model only)
PAL Output Setting (not North
American models)
Digital
Out/
Digital1
(i.LINK)
Digital
Out/
Digital2
(HDMI)
Linear PCM Out
i.LINK Output Setting
Audio
Analog
Audio
Out
AV Synchronization
Dynamic Range Control (Dolby
Digital only)
SACD Audio Setup
CD Audio Setup
On-Screen Language
Language
Disc Menu Language
Audio Language
Subtitle Language
68
Dolby Digital Out
DTS Out
MPEG Out
Digital Out
Dolby Digital Out
DTS Out
MPEG Out
Digital Out
2 Channel Stereo, Lt/Rt
Dolby Pro
Logic Setting
Speaker On,
Setting Off
Multi
Channel
Speaker On,
Distance Off
Test Tone
Description
Selects a picture format to match the aspect ratio of your
TV.
Picture adjustments for interlaced scanning.
Picture adjustments for progressive scanning.
Selects the video format for the SCART output: RGB,
S-Video, or composite.
Specify how the DV-SP1000/DV-SP1000E outputs video
signals when playing NTSC discs.
Determines whether Dolby Digital audio is downmixed.
Determines whether DTS audio is downmixed.
Determines whether MPEG audio is downmixed.
Turns the DIGITAL 1 AUDIO OUTs on and off.
Determines whether Dolby Digital audio is downmixed.
Determines whether DTS audio is downmixed.
Determines whether MPEG audio is downmixed.
Turns the DIGITAL 2 AUDIO OUTs on and off.
Determines whether 96 kHz digital audio is
downsampled.
Turns the i.LINK output on and off.
Determines how the FRONT AUDIO OUT sockets
downmix multichannel audio.
Determines how the built-in Dolby Pro Logic decoder
works.
Specify which speakers are connected and their sizes,
and enable (on) or disable (off) the Speaker Setting.
Specify the distance between each speaker and the
listener, and enable (on) or disable (off) the Speaker
Distance setting.
Adjust individual speaker levels with the test tone.
Resynchronizes sound and picture.
Sets the Dynamic Range function.
Determines how SACD multichannel, 2-channel, and CD
tracks are played.
Configures the digital audio outputs for CD or DTS CD.
Specify a language for the onscreen setup menus and
messages.
Specify your preferred language for disc menus.
Specify your preferred language for soundtracks.
Specify your preferred language for subtitles.
Page #
72
72
73
74
74
74
74
75
75
75
75
75
75
75
76
76
79
80
80
80
81
81
81
82