Onkyo DV-SP1000 Instruction Manual page 78

Configuring the DV-SP1000/DV-SP1000E
5
Use the Up and Down [
buttons to select Surround
Remote controller
Speaker, press the [ENTER] but-
ton, use the Left
[
ENTER
and then press the [ENTER] but-
ton.
Large: Select if the surround speakers
are large.
Small (default): Select if the surround
speakers are small.
Off: Select if no surround speakers are
being used.
If the Subwoofer setting is set to Off,
only the Large and Off options can be
selected.
6
When you've finished, press the
[SETUP] button to exit setup, or
Remote controller
press the Left [
edly to go back to the main setup
menu.
Setting the Speaker Distances
1
Use the Up and Down [
buttons to select Speaker Dis-
Remote controller
tance, press the [ENTER] button,
use the Up and Down [
buttons to select On, and then
ENTER
press [ENTER] again.
When the Speaker Distance is set to
Off, these settings cannot be selected.
78
and
Right [
] buttons to select an option,
] button repeat-
2
]/[ ]
Remote controller
]/
ENTER
]/[ ]
3
]/[ ]
Remote controller
Note:
• The Speaker Distance settings have no effect on
SACD (multichannel area and 2-channel area) and
196 kHz/176.4 kHz DVD-Audio.
and
Use the Up Down [
buttons to select each speaker,
press the [ENTER] button, use
the Left and Right [
tons to specify the distance from
each speaker to the listening
position, and then press the
[ENTER] button.
Speaker distances can be specified in
steps of 1.0 ft. (0.3 m).
(The North American model displays
feet; other models display meters.)
Speaker Range
Front Left
Center
Front Right
1.0–30.0 ft.
Surround
(0.3–9 m)
Right
Surround Left
Subwoofer
Notes:
• If the distance between the furthest
and nearest speakers is greater than
20 feet, corrected values suitable for
home theater use will be set automat-
ically.
When you've finished, press the
[SETUP] button to exit setup, or
press the Left [ ] button repeat-
edly to go back to the main setup
menu.
]/[ ]
]/[ ] but-
Default
12.0 ft.
(3.6 m)
7.0 ft.
(2.1 m)
12.0 ft.
(3.6 m)