Front/Rear Cargo Racks; Radiator Cap; Fuse - Can-Am Rally 200 Operator's Manual

vmo2006-001-009_a
1. Tool kit
2. Muffler
3. Rear bumper
The tools included in the tool kit are:
– pliers (1)
– screwdriver (1)
– open wrench 10/13 mm (1)
– open wrench 15/17 mm (1)
– socket wrench 10/13 mm (1)
– socket wrench 16/18 mm (1)
– tire pressure gauge (1)
– adjuster lock for drive chain adjust-
ment (1)
– fuse 15 A (1).
14) Front/Rear Cargo
Racks
Located on top of chassis at front and
rear. Convenient racks to carry mate-
rial.
WARNING
Ensure to properly secure material
to racks. Do not overload. Ensure
load does not interfere with visibil-
ity and/or steering. Do not carry
passenger(s).
Refer to SPECIFICATIONS for carry-
ing loads and cargo weight distribution
recommendations.
______________________
74

15) Radiator Cap

Located under front fender. It pro-
vides access to the radiator filling
neck.
WARNING
In order to avoid potential burns,
do not remove the radiator cap if
the engine is hot.
Turn radiator cap counterclockwise to
remove. When finished, properly rein-
stall radiator cap.
1
V06C2CY
1. Radiator cap

16) Fuse

The electrical system is protected with
a fuse. Refer to MAINTENANCE sec-
tion for details.
The fuse holder is located behind right
front shock, near coolant reservoir.