Stopping The Engine; Post-Operation Care - Can-Am Rally 200 Operator's Manual

Stopping the Engine

WARNING
Avoid parking vehicle on slope.
Release throttle and completely stop
the vehicle.
Apply the parking brake by using brake
lever lock on brake lever.
Set transmission lever in NEUTRAL
position.
Push the engine stop switch in OFF
position.
Turn key in ignition switch to OFF po-
sition.
Remove key from ignition switch.

Post-Operation Care

When vehicle is used in salt-water
environment (beach area, launching/
loading boats etc.), rinsing the vehi-
cle with fresh water is necessary to
preserve vehicle and its components.
Metallic parts lubrication is highly rec-
ommended. Use XP-S Lube (P/N 293
600 016) or an equivalent. This must
be performed at the end of each op-
erating day.
When vehicle is operated in muddy
conditions, rinsing the vehicle is rec-
ommended to preserve vehicle and its
components and to keep lights clean.
NOTE: Never use a high pressure
washer to clean the vehicle USE
LOW PRESSURE ONLY (like a gar-
den hose). The high pressure can
cause electrical or mechanical dam-
ages.
______________________
84