Can-Am Rally 200 Operator's Manual page 101

A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
T: PROCEED WITH TASK
PART/TASK
FUEL
(2)
Air filter
Fuel lines and connections
Fuel tank strainers
(1)
Carburetor
ELECTRICAL
(5)
Spark plug
Battery electrolyte level and connections
Wiring harnesses, cables and lines
Condition of ignition switch, engine start
button and engine stop switch
Condition of lighting system (HI/LO intensity,
brake lamp, headlamp aiming, etc.)
DRIVE TRAIN
Drive chain lubrication
Drive chain slider condition
Drive chain adjustment
Sprockets
Wheel bearing condition
PERIODIC MAINTENANCE CHART
INITIAL INSPECTION 10 H OR 30 DAYS OR 200 km (125 mi)
(To be performed by an authorized Can-Am dealer. The initial
maintenance is very important and must not be neglected.)
I,
C
(4)
I
A
I
I
I
I
(2)
I
(2)
EVERY RIDE
EVERY RIDE
EVERY RIDE
I
_____________________
25 H OR 500 km (310 mi)
50 H OR 1000 km (620 mi)
100 H OR 1 YEAR OR 2000 km (1250 mi)
200 H OR 2 YEARS OR 4000 km (2485 mi)
TO BE PERFORMED BY
R
Customer
(4)
I Dealer
R Dealer
A Dealer
R Customer
I Customer
I Dealer
I Customer
I Customer
Customer
Customer
Customer
I Customer
I Customer
LEGEND
(1) Emission-related component.
(2) Pre-ride inspection item.
(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.
(2) Pre-ride inspection item.
(5) Make sure the spark plug is
correctly gapped.
—
99