Fuel Tank Cap; Fuel Valve - Can-Am Rally 200 Operator's Manual

V06G0OY
1. Ignition switch
Insert key in switch and turn to the
desired position. To remove key, turn
key to OFF position then pull it out.
The ON with lights position, turns on
all lights with either the engine run-
ning or not. Remember that having
the lights on without the engine run-
ning discharges the battery. Always
turn ignition to OFF position after en-
gine has been stopped.
NOTE: While engine can be stopped
by turning ignition key to OFF posi-
tion, we recommend the engine be
stopped by the engine stop switch.

9) Fuel Tank Cap

Unscrew counterclockwise and re-
move cap to allow fuel tank filling then
fully tighten clockwise.
______________________
72
1
WARNING
Always stop engine before re-
fueling. Open cap slowly. If a
differential pressure condition is
noticed (whistling sound heard
when loosening fuel tank cap)
have vehicle inspected and/or re-
paired before further operation.
Fuel is flammable and explosive
under certain conditions. Never
use an open flame to check fuel
level. Never smoke or allow flame
or spark in vicinity. Always work
in a well-ventilated area. Never
top up the fuel tank before plac-
ing the vehicle in a warm area.
As temperature increases, fuel ex-
pands and may overflow. Always
wipe off any fuel spillage from the
vehicle.
V06F0RY
1. Fuel tank cap

10) Fuel Valve

Located on left side of vehicle under
seat. 3-position rotary valve: OFF,
ON, RES. Rotate the tap to align its
pointer with ON, OFF or RES.
1