Suspension; Adjustment; Lubrication; Inspection - Can-Am Rally 200 Operator's Manual

SUSPENSION

Adjustment

WARNING
Adjust both springs to the same
length. Uneven adjustment can
cause poor handling and loss of
stability and/or control, and in-
crease the risk of an accident.
Spring preload may vary from rider
to rider depending upon their weight.
Preload can be changed by setting
both lock nuts up or down to com-
press the spring to different lengths.
Shorten the spring for a firmer ride and
rough road condition.
Lengthen the spring for a light load and
a smooth road condition.
V06J0GY
FRONT SUSPENSION
A. Same length on both sides
A
_____________________

Lubrication

A-Arm
Lubricate front A-arms. Use synthetic
grease (P/N 293 550 033) or an equiv-
alent. There is two grease fittings on
each A-arm.
1
V06J01Y
1. Grease fittings
Swing Arm
Lubricate swing arm pivots. Use syn-
thetic grease (P/N 293 550 033) or an
equivalent.

Inspection

Front and Rear Suspension
Inspect shock absorbers for oil leaks
and fasteners for tightness. See an
authorized Can-Am dealer as neces-
sary.
Swing Arm
Check swing arm for distortion,
cracks or bending.
rized Can-Am dealer if any problem is
detected.
A-Arms
Check A-arms for cracks, bending or
other damages. See an authorized
Can-Am dealer as necessary.
See an autho-
121