Parking Brake; Transmission Lever - Can-Am Rally 200 Operator's Manual

4) Parking Brake

Located on left side of handlebar on
the rear brake lever. When applied,
it prevents the vehicle from moving.
Useful when the brake needs to be
locked for example such as doing a
K-turn, during transportation or when
the vehicle is not in operation.
WARNING
Always use the parking brake and
engage the HI position on the
transmission lever when the vehi-
cle is not in operation.
WARNING
Make sure parking brake is fully
disengaged before operating the
vehicle. Riding the vehicle with a
continuous pressure on the brakes
may cause damage to the brake
system and cause loss of braking
capacity and/or fire.
To engage mechanism:
brake lever and push down the brake
lever lock with a finger. Brake lever
is now compressed and applying rear
brakes.
1 2
V06K10Y
1. Brake lever lock
2. Press to apply parking brake
______________________
68
To release mechanism:
brake lever. Lever lock should auto-
matically return to its original position.
Brake lever should return to rest po-
sition. Always release parking brake
before riding.

5) Transmission Lever

Located on the right side of vehicle, at
the rear of engine. A 3-position lever:
R, N and H.
To change the transmission position,
completely stop vehicle then move
lever to the desired position while
moving lever upward or downward.
Do not force lever. If unable to shift,
gently apply throttle and release it
immediately then, wait engine RPM
returns to stable idle and try again.
CAUTION: Always completely stop
the vehicle and apply the brake
prior to moving the transmission
lever.
R: Reverse
Squeeze
V06E0CY
REVERSE POSITION
This allows the vehicle to go back-
ward. This vehicle is equipped with
a reverse speed limiter system. Re-
fer to OVERRIDE BUTTON further, for
more informations.
Squeeze