Applicable Instructions; A/D Conversion Value - Omron HOME SECURITY SYSTEM - MOTION SENSOR FQM1-CM001 Operation Manual

Analog Input Functions
7-9-5

Applicable Instructions

With END Refreshing
With Immediate
Refreshing
7-9-6

A/D Conversion Value

Signal Range: −10 to
10 V
Signal Range: 0 to 10 V
222
Read the analog input PV (A550) using an instruction such as the MOV
instruction.
The data is acquired immediately with the PRV(881) instruction.
(@) PRV
P
C
D
When a signal is input that exceeds the allowed ranges indicated below, the
conversion value will be processed as it is. However, inputting out-of-range
signals may result in hardware failure or system malfunction, so do not input
out-of-range signals.
Note If a voltage exceeding the input voltage limits is input, the conversion value
will be either the upper or lower limit value.
Analog input (V)
+11.0 V
+10.0 V
0.0 V
−10.0 V
−11.0 V
E0C0
DDA0
Resolution of 1/16,000
Analog input (V)
+10.5 V
+10.0 V
−0.0 V
−0.5 V
0000
FE70
Resolution of 1/8,000
P: Output port (#0003: Analog input)
C: Control specification (#0000: Present value read)
D: Present value storage first word
Stored value
0000
1F40 (4-digit Hexadecimal)
2260
Stored value
1F40
(4-digit Hexadecimal)
20D0
Section 7-9