Changing The Main Fuse - KTM 450 XC-F Owner's Manual

14 ELECTRICAL SYSTEM
14.4

Changing the main fuse

Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
–
Use only fuses with the prescribed amperage. Never bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under the seat.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
Main work
–
Pull starter relay
102224-10
–
Remove protection caps
–
Remove the faulty main fuse
Info
A defective fuse can be identified by the burned-out fuse wire
A spare fuse
–
Install a new main fuse.
Fuse (58011109110) (
–
Check that the electrical equipment is functioning properly.
Tip
Insert the spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and lay the cable.
102225-10
Finishing work
–
Mount the seat. (
p. 46)

from the holder.

.

.

is located in the starter relay.
p. 97)
p. 47)
77
 .