Handlebar Position; Adjusting The Handlebar Position - KTM 450 XC-F Owner's Manual

10 TUNING THE CHASSIS
10.16

Handlebar position

10.17

Adjusting the handlebar position

–
Mount protection caps
(SX‑F US, XC‑F US)
–
Turn the red adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
102143-11
Guideline
Rebound damping (SX‑F US)
Comfort
Standard
Sport
Rebound damping (XC‑F US)
Comfort
Standard
Sport
The holes on the handlebar support are placed at a distance of
Hole distance A
The handlebar can be mounted in two different positions. In this way, the handlebar
can be mounted in the position that is most comfortable for the rider.
102144-10
Preparatory work
–
Remove the handlebar cushion.
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.

.

all the way clockwise.
Info
The adjusting screw  is located at the upper end of the right fork leg.
The rebound damping is located in the right fork leg REB (red adjusting
screw). The compression damping is located in the left fork leg COMP
(white adjusting screw).
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
3.5 mm (0.138 in)
17 clicks
15 clicks
13 clicks
17 clicks
15 clicks
13 clicks

from the center.
34