Removing The Seat - KTM 450 XC-F Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.20

Removing the seat

–
Mount the chain.
–
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the direction of travel.
S00854-10
–
Position the foot brake cylinder.
Push rod
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
Remaining screws, chassis
S00855-10
–
Position the angle lever and linkage lever.
–
Mount and tighten screw cap
Guideline
Nut, linkage lever to angle lever
Info
Pay attention to the flat area
–
Mount and tighten screw
S00856-10
Guideline
Screw, bottom shock
absorber
–
Position the frame protector on the left and right.
–
Mount and tighten screws
Guideline
Screw, frame protector
–
Mount the cable tie(s).
K00222-10
Finishing work
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
–
Remove screws
102173-10


engages in the foot brake cylinder.

.
 .

.
 .
M10

with the washers.

.
.
M6 10 Nm (7.4 lbf ft)
M14x1.5 80 Nm (59 lbf ft)
60 Nm Loctite
(44.3 lbf ft)
M5 3 Nm (2.2 lbf ft)
p. 64)
p. 36)
46
® 2701™