Adjusting The Basic Position Of The Shift Lever - KTM 450 XC-F Owner's Manual

16 TUNING THE ENGINE
16.7

Adjusting the basic position of the shift lever

–
Remove screw
401950-12
–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position and engage the
gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
–
Mount and tighten screw.
401951-10
Guideline
Screw, shift lever

and take off shift lever

of the shift lever and shift shaft.
M6

.
14 Nm Loctite
(10.3 lbf ft)
84
® 243™