11
SERVICE WORK ON THE CHASSIS
11.9
Removing the lower triple clamp
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
102150-11
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
–
Position the brake line and clamp. Mount and tighten screws
K00186-10
Finishing work
–
Install the front wheel.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove the front fender. (
–
Remove the handlebar cushion.
Main work
–
Remove the holder with FI warning lamp.
–
Remove screw
–
Remove screw
–
Take off the top triple clamp with the handlebar and set it aside.
Info
Cover the components to protect them against damage.
Do not bend the cables and lines.
102152-10
–
Remove O-ring
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
102153-10
.
.
M8
(
p. 69)
(
p. 69)
(
p. 38)
p. 43)
p. 43)
.
.
. Remove protective ring
M8
17 Nm
(12.5 lbf ft)
M8
12 Nm (8.9 lbf ft)
.
Loctite
25 Nm
(18.4 lbf ft)
.
p. 36)
.
39
®
243™