Service Work On The Chassis; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - KTM 450 XC-F Owner's Manual

11

SERVICE WORK ON THE CHASSIS

11.1

Raising the motorcycle with a lift stand

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
11.2

Removing the motorcycle from the lift stand

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
1 0 0 1
11.3

Bleeding the fork legs

–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
(All SX‑F models)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
spindle.
402001-10
(XC‑F US)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
lean the motorcycle on it.
401943-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
(SX‑F EU)
–
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
402558-12
Info
Remove the plug-in stand before riding.
Info
When you are riding, the side stand must be folded up and secured with
the rubber band.

.

into the left side of the wheel

to the ground with your foot and
p. 36)
36