14
ELECTRICAL SYSTEM
14.1
Removing the battery
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the battery.
–
Only charge in well-ventilated rooms.
–
Maintain the minimum clearance to inflammable materials while charging.
Minimum clearance
–
Over-discharged batteries with a charge of less than 9 V are not permitted to be charged. They must be disposed of.
14.2
Installing the battery
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
Main work
(All SX‑F models)
–
Disconnect negative cable
–
Pull back positive terminal cover
battery.
–
Remove screw
–
Pull holding bracket
102221-10
(XC‑F US)
–
Disconnect negative cable
–
Pull back positive terminal cover
battery.
–
Remove screw
–
Pull holding bracket
S00862-10
Main work
(All SX‑F models)
–
Insert the battery into the battery compartment with the terminals facing for-
ward and secure with the holding bracket
Battery (C22S) (
–
Mount and tighten screw
Guideline
Remaining nuts, chassis
–
Connect positive cable
Guideline
Screw, battery terminal
Contact disks
ets
–
Slide positive terminal cover
102222-10
1 m (3 ft)
p. 46)
from the battery.
.
forward and remove battery toward the top.
from the battery.
.
forward and remove battery toward the top.
p. 97)
.
and negative cable
must be mounted between screws
with the claws facing down.
over the positive terminal.
and disconnect the positive cable from the
and disconnect the positive cable from the
.
M6
10 Nm
(7.4 lbf ft)
with the battery.
M5
2.5 Nm
(1.84 lbf ft)
and cable sock-
74