Adjusting The Rebound Damping Of The Fork - KTM 450 XC-F Owner's Manual

10 TUNING THE CHASSIS
10.15

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
(SX‑F EU)
–
Turn adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping
S00860-10
Comfort
Standard
Sport
(SX‑F US, XC‑F US)
–
Turn the white adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
102142-11
Guideline
Compression damping (SX‑F US)
Comfort
Standard
Sport
Compression damping (XC‑F US)
Comfort
Standard
Sport
(SX‑F EU)
–
Remove protection cap
–
Turn adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
M01100-10
Rebound damping
Comfort
Standard
Sport

clockwise all the way.
Info

The adjusting screw is located at the upper end of the right fork leg.
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.

Info

The adjusting screw is located at the upper end of the left fork leg.
The compression damping is located in the left fork leg COMP (white
adjusting screw). The rebound damping is located in the right fork
leg REB (red adjusting screw).
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
 .

clockwise all the way.
Info

The adjusting screw is located at the lower end of the right fork leg.
20 clicks
17 clicks
12 clicks
all the way clockwise.
17 clicks
15 clicks
13 clicks
17 clicks
15 clicks
13 clicks
20 clicks
17 clicks
12 clicks
33