11
SERVICE WORK ON THE CHASSIS
11.14
Removing the start number plate
11.15
Installing the start number plate
11.16
Removing the front fender
–
Remove screw
–
Unhook the start number plate from the brake line and remove it.
102160-10
–
Attach the start number plate to the brake line.
–
Position the start number plate. Mount and tighten screw
Guideline
Remaining screws, chassis
The holding lugs engage in the fender.
102161-10
Preparatory work
–
Remove the start number plate. (
Main work
–
Remove screws
102162-11
.
p. 43)
and
. Remove the front fender.
.
M6
10 Nm (7.4 lbf ft)
43