H/W Monitor Menu - AXIOMTEK wm5201 User Manual

MANO881 Series All-In-One Mini ITX Board
5.6

H/W Monitor Menu

In this section, it allows you to monitor the status of the hardware on your system, including the
parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan
speed, and the critical voltage.
CPU_FAN1 Setting
This allows you to set CPU fan 1's speed. Configuration options are Full On and Automatic
Mode. The default value is Full On.
CHA_FAN1 Setting
This allows you to set chassis fan 1's speed. Configuration options are Full On and Automatic
Mode. The default value is Full On.
Over Temperature Protection
Use this to enable or disable Over Temperature Protection. The default value is Enabled.
Case Open Feature
This allows you to enable or disable case open detection feature. The default value is
Disabled.
Clear Status
This option appears only when the case open has been detected. Use this option to keep or
clear the record of previous chassis intrusion status.
AMI BIOS Setup Utility 47