Other Standard Cables - HP Series 200 Installation Manual

Cables and Connectors

Other Standard Cables

Other Standard Cables
Cable and Connector on Router
Token ring, shielded, twisted-pair cable
connecting to the 9-pin female token
ring port with a male 9-pin
subminiature D-connector
RS-232 modem cable for a modem
connecting to console port
RS-232 cable for a terminal or PC
2
connecting to console port
1 The required minimum pin-out is listed in the next section, ''Cable/Connector Pin-Outs''.
2 Signals DTR (pin 20) and RTS (pin 4) must be on, or high, on your terminal or in your terminal emulation program.
3 Two cables are required for dual attachment to another HP router having an FDDI port or an adjacent DAS.
A-4
Connector on Attached Device
For a medium interface
connector (MIC) conforming to
IEEE 802.5 specifications for
connection to a trunk coupling
unit (TCU)
For 25-pin female or male port
For 25-pin male port
For 9-pin male port
Standard Cable or Cable Solution
Available from several vendors, such
as Black Box and Inmac.
Not offered by Hewlett-Packard.
Use a standard (straight-through)
modem cable.
1
Attach a null modem adapter (Tandy
Null Modem Adapter No. 26-1496 has
been tested) to the console port. Then
attach a straight-through modem cable
to the null modem adapter.
Use a Black Box PC/AT Serial Printer
Cable (EVNBPC has been tested).
OR
Attach a null modem adapter (Tandy
Null Modem Adapter No. 26-1496 has
been tested) to the console port. Then
attach a modem cable (Black Box
Cable EVNBMC and Cablex PC Modem
Cable have been tested) to the null
modem adapter.