HP Series 200 Installation Manual page 46

Installation
Phase 4: Initialize and Verify the Router
Upon entering the event log, you will see the first event for the most
recent reboot at the top of the display. To navigate among the events
displayed, use the following keys.
Refer to chapter 5, How To Use the Event Log To Analyze Router
Operation in the User's Guide for more key options and other
information about display control keys, a full explanation of the
parts of an event line, the severity ratings, and the number and range
of events kept in the log. For the meaning of individual event
messages, refer to the Operator's Reference.
2. In the event log, verify that the circuits and services that you
configured are being enabled. The events being listed in the event log
should be consistent with information recorded on the network
maps.
3. Verify that no warning, major, or fatal events have occurred. (If any
such events have occurred, you will probably want to determine
what caused them and take remedial steps before continuing.)
1-38
[Return] Advance display by one page
[P] Roll back display by one page
[v]
Advance display by one event
[^]
Roll back display by one event
[>]
Display last page (newest events)
[C] Display first page of events for most recent reboot
[H] Display help for event log (including more control keys)
[<]
Exit from event log