Verify Router Initialization - HP Series 200 Installation Manual

Installation
Phase 4: Initialize and Verify the Router
E. Verify Router Initialization
N o t e
The following is an overview of router initialization. For more on
verification tests, refer to the User's Guide for your router.
Earlier in the startup process it is normal to verify proper router hard-
ware operation. (See ''Plug in and verify the router hardware'' on page
1-22.) Then, after you configure and boot the router, you should verify
that the following two conditions exist:
The network links are operational
All networks can be reached by the router
While verifying initialization, you can save steps by operating from the
Network Control Language Interpreter (NCL). To begin, select NCL from
the Main menu by pressing [2].
Access to NCL
Figure 1-28. The NCL Selection in the Main Menu
1-36