If You Don't Get Through; Using The Callback Facility; Storing A Callback Request; Answering A Callback Request - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
Callback
qd
or

If you don't get through...

Using the callback facility

If an internal station which you have called is busy or
there is no reply, you can place a request for callback.
This also applies to external calls via ISDN switching
centres. This saves you having to dial the number re-
peatedly. You are then called back
• as soon as the other party terminates his call
• as soon as the other party makes a further call
• as soon as the other party checks his mailbox and
responds to your callback request (! page 13).
You can only place one request for callback at a time.

Storing a callback request

Precondition: The station which you have called is
busy or there is no reply.
Press the key. The lamp lights up.
qm
or UK code or Standard code

Answering a callback request

The telephone rings.
n
Lift the handset. Ringing tone can be heard.
If you do not answer a callback request within
four rings, the request is cancelled.
If you don't get through...
25