Voice Calling In A Group - Siemens HiPath 4000 Operating Instructions Manual

Using HiPath 4000 as a intercommunication system
Step by Step
p
Enter the code!
48

Voice calling in a group

A normal connection within a group or team (for team
call = speed-calling number for team members 0 to 9 or
00 to 99) can also be set up via Voice calling. To do this,
voice calling is initiated from a group telephone.
The "voice calling in the group" function is line-
independent – anyone can voice call anyone else.
n
Lift the handset.
Enter the system code-number for "voice calling in the
group" and
p
the speed calling code for the group member in questi-
on.
or
Press the key for "voice calling in the group" (must be
installed)
and
p
the speed calling code for the group member in questi-
on.
A connection to the destination loudspeaker is set up
immediately, if
• there is no busy condition
• the handset is cradled
• and voice-calling protection has not been activated.
The called party accepts the voice call by lifting the
handset.
If the called party presses the loudspeaker key or the
line key (if installed), the connection is aborted.