Making Calls In A Team; Taking A Call For A Colleague; Parking A Call And Picking It Up Within The Team - Siemens HiPath 4000 Operating Instructions Manual

Making calls in a team

Step by Step
n
and
Call pickup
or
Call pickup
Call pickup
Disconnect/Clear
Call park
Call park
50
Making calls in a team

Taking a call for a colleague

If a member of a team does not answer a call within 15
seconds (depending on the system), the other mem-
bers of the team hear an alerting tone.
Telephone in the idle state:
Lift the handset and press the flashing key. You have
picked up the call.
Press the flashing key only.
You are in the open listening mode.
During a call:
Press the flashing key.
The first party is placed on hold while you are connect-
ed to the second party.
Terminate the second call – return to the first call:
Press the key.
Parking a call and picking it up within
the team
You can park a call within the call pickup group on one
telephone and then continue it at a different telephone.
Parking the call:
Press the key. The key flashes at all telephones in the
team.
t
Replace the handset.
Resuming the call:
Press the flashing key. Continue the call.